indebt&lovinit

Hi guys

I know that mazworx makes an adapter plate for the f20c to z33 but that leaves us with the problem of figuring out all the bits and bobs that go with it.
Now me and a few guys on the boosted s2000 Facebook page have been trying to get them to produce a full kit like they do for the 240sx
seen here : http://www.mazworx.com/mazworx-sr-vq-adapter-kit-for-s-chassis.aspx

I have emailed them about
Our need of a swap in this price range ($1600) plus cost of a transmission and some type of clutch

This was the reply

We have no doubt in the interest of this kit and we have even tried
to get group buys together for it (we hard a target price point of
$4,000-5,000 including a brand new CD009) but the issue was that we
could never get a car into our facility for testing therefore
development halted.

--
Thanks,
Hanz Brady

So sounds like they need a car as a test bed. They are located in Sanford, Florida
I would really like to have this swap on the market but need help. If you're local, and are interested in helping some fellow S2000 owners, give them a call/email
407-281-1223
info@mazworx.com

LostMarine

Emailed before you, so thats 2 of us. Clutchmaster already has a s2k-vq clutch part #

indebt&lovinit

Do you happen to know if its just the clutch or is it a clutch/flywheel to go with an adapter?

kabaroo

i was on FB group text. if i remember correctly it should be a twin disk, flywheel and clutch all together.

kabaroo

side note... anyone think s2ki would benefit from a trans/diff/axel specific sub forum? its the Achilles heal of the car

StocS2k

Yes^^