Possible to run CC stage 4 + stock disc?

Reply Subscribe

Thread Tools

Jul 7, 2010 | 04:18 AM

s2kswe

Thread Starter

Registered User

Joined: Jan 2008

Posts: 594

Likes: 0

Possible to run CC stage 4 + stock disc?

Hi, would this work? To swap the 6puck disc out for the stock one? Any increased holdingpower over stock?

Jul 7, 2010 | 05:04 AM

Little_AP1_S2K

Registered User

Joined: Jul 2009

Posts: 800

Likes: 0

the PP on CC is very soft just like the stock one so id say no. but im no 100% sure.

Jul 7, 2010 | 05:40 AM

Elroy

Registered User

Joined: Dec 2006

Posts: 3,286

Likes: 0

From: Tampa, Fl

I am running a CC Stage 3 with oem disc since the CC disk is noisey as phuck. There is probably some give for those way over 400+

J

Jul 7, 2010 | 05:47 AM

SeanSerino

Registered User

Joined: Mar 2008

Posts: 1,583

Likes: 1

From: Morristown, NJ

I am running the CC 6 puck with an AP1 flywheel. I have no problems.

Jul 7, 2010 | 06:25 AM

TRBOKEV

Registered User

Joined: Jun 2004

Posts: 4,712

Likes: 0

From: Phillips Ranch 909!

It's going to be like a stock clutch...
All the added clamping in that clutch system is in the clutch disc.

Jul 7, 2010 | 09:16 AM

m R g S r

Registered User

Joined: Oct 2006

Posts: 2,507

Likes: 0

From: Westchester NY

P=F/A less area, more force on each puck. so with the same pressure plate, a full face disc will not hold as much tq as a puck disc.

Jul 7, 2010 | 12:47 PM

s2kswe

Thread Starter

Registered User

Joined: Jan 2008

Posts: 594

Likes: 0

So the CC clamps about as much as stock? Every gain in torque lies in the 6puck disc?

Possible to run CC stage 4 + stock disc?

Possible to run CC stage 4 + stock disc?

Trending Topics