S/C owners please post your dyno graphs along with the size of the pulley, psi, and supporting mods. I really want to see the power/torque curve (especially tuned comptech kits) thanks all.

 

This chart contains both Turbo and Supercharger applications. but a lot of users have posted into this thread and were put on the chart. Hopefully i will be on there soon

https://www.s2ki.com/s2000/topic/909...d-power-chart/

 

I need to update mine, but since im dropping in a new oem ap2 short block, the numbers are gonna be wildly different!

 

what are you currently making and what psi

 

Vortech V3
4in pullley
9psi
Flashpro
SOS 4bar MAP
ID1000's
Larger EBAY heat exchanger
Larger Bosch Intercooler pump
AEM Water/Meth
Berk Header and Test pipe with stock exhaust

 

any other supporting mods? I know the comptech kit has a Novi 1000 and I think the Vortech V3 is a Novi 1220, If you are making that power on a 4" pulley, I'd hope I can make it with say a 3.4" pulley

 

The Vortech V3 is not a Novi.

 

The Vortech V3 is not a Novi.
[/quote]

OK thanks for that, I'm pretty new to this lol.

 

According to Vortech (Jamie), the V3 SCi is identical to the Novi 1220SL and the V3 Si is identical to the Novi 1200SL. I was told this when asking for the compressor maps for the 1200SL and 1220SL blowers.

 

Here's my last tune. Was with a 4" pulley on my vortech kit. Overlayed with the 5" vortech pulley. 7.5 psi for the 5" and 12.5 psi I believe for the 4".

Made 406whp and 240tq at Evans tuning.
Supporting mods are:
Aem ems 1052
ID1000 cc injectos
Upgraded front mount heat exchanger
Hondata 4 BAR map sensor
HKS dual exhaust
60mm test pipe
4" intake elbow