SOS Stage 2 w/ 3in pulley and Kpro Tune
#1
Registered User
Thread Starter
Join Date: Apr 2009
Location: Olathe, KS
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
SOS Stage 2 w/ 3in pulley and Kpro Tune
So the car is a 2006 Honda S2K in Grand Prix White. I have just over 10k on the clock and love it.
Mods include:
SOS Stage 2
Paxton 1220
850cc injectors
3in Pulley - 12psi@8200rpm
SOS 3 bar map sensor
Walbro fuel pump
Boost a pump from Procharger
King Motorsports Bored Throttle Body
T1R response header
Berk 70mm High Flow cat
Ultimate Racing 3.0in duals
Competition Clutch Stage 2 with organic disc
Bilstein Pss9 coilovers
Project Kics Wheels spacers 20mm fron and rear
Hawk HPS pads
As listed on the dyno I made 415hp and 277tq @ 8200 at the wheels. The dyno is a dynacom. It reads a little low copared tot he other two dynapacks in town. The dip on the dyno up top is my spark plugs getting blown out. Tightened the gap a bit and been good since.
Im thinking about upping the boost a bit and switching to e85, I am in the midwest. I would have to upgrade to a stronger clutch and a 1200 Paxton though. So may be later than sooner.
Oh yeah, it runs like a raped ape! Can't imagine how the turno S's with 500+ do. Would be badass Im sure!!
#3
Nice man! But out of curiosity why are you only netting 12psi with this pulley? Are you at a higher elevation? Exhaust system? I would expect closer to 14psi at that rpm.
#6
Registered User
Thread Starter
Join Date: Apr 2009
Location: Olathe, KS
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
Olathe, KS is the locale. Not sure of the elevation here. Just on the outskirts of KC. Not many Hondas here. But the few of us S2K guys here try our best, haha
Trending Topics
#9
Registered User
Thread Starter
Join Date: Apr 2009
Location: Olathe, KS
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
Its houseofboost.com, from what I understand its a "dynocom"
From their site:
"House of Boost utilizes the latest in dynamometer technology with a Dynocom Eddy-Current Load Dyno, currently the only “load” dyno in the Kansas City Metro area. Our in-ground dyno is rated up to 2,500+ HP, and 185+ MPH and features an 86" oversized roller for wide trucks and sand cars. This state-of-the-art dyno also features the patented “X-Cut” tread pattern on the rollers, capable of handling high horsepower cars and trucks without tire slippage."
From their site:
"House of Boost utilizes the latest in dynamometer technology with a Dynocom Eddy-Current Load Dyno, currently the only “load” dyno in the Kansas City Metro area. Our in-ground dyno is rated up to 2,500+ HP, and 185+ MPH and features an 86" oversized roller for wide trucks and sand cars. This state-of-the-art dyno also features the patented “X-Cut” tread pattern on the rollers, capable of handling high horsepower cars and trucks without tire slippage."