Yes, it is the shifter bracket that holds the shifter to the tranny. All the shifter bushings are installed into it.

 

No you will not need the bracket. All the parts I have listed are what you need If you do not have a used shifter already. Don't worry about the numbers on the diagram. Just order the parts I have listed and the quantity. I just posted the diagram so people know how the parts go together.

 

There was a complete v161 fs on ebay.

Sent using free Tapatalk - Android FTW

 

only pic i got.
so far tranny is bolted up just need to bolt up the shifter/drive shaft and the other bits and peices. will be running tommorw. anyone have any advice to wiring up the spedo healer?

 

Woo la la! Gsx2004 is the one doing all my work on my car right now and supposebly he got all te research done for it so ask him about the speedo issue...

It's looking good

 

Also, did you end up getting the steel or aluminum shaft?

 

almost done

 

Nice

Sent from my SPH-D710 using Tapatalk 2

 

 

So the swap is all in and running. The clutch and tranny feels awesome. the twin disk is A LOT better to drive with than my old CC stage 4 clutch. Got the spedo working using a speedohealer. if anyone needs help getting the speedo to work let me know. Shoutout to LJ at FB for all the help and making such a great kit. Can't wait to break in the clutch to bang some gears