Hey guys. so i got a good deal on a t4 manifold and i want to run a 3076r. they only come in a t4 flange. they make t3 to t4 adapters but they add another 2.5 inches to hight and idk if the turbo will fit under the hood at that point. whats my best bet to go? get a t3 flange welded on the manifold? or just go 3582r? the down pipe is vband too and idk if the 3076 has a vband outlet or can come with one. please help thanks

 

You can get the 30R with a custom T4 housing. Otherwise I would go with the 35R or a Precision turbo of some kind.

 

Drill the T4 Flange for a T3. I think the inlet dimensions may be close to the same.....will have to check on that.

 

thats an idea.

 

If you modify the bolt holes you also need to modify the inlet on the turbo, thats a pain in the butt.

 

nah i would modify the manifold holes to fit the bolt holes of the turbo

 

But the manifold has T4 openings and the turbo would have T3, you would get turbulence around the opening of the turbo causing heat and pressure.

 

i need an adapter or a custom t4 housing. or a t3 flange on the mani.