low offset ce28
but i do have matte black/red lip set coming in! 
Registered User
Joined: Aug 2005
Posts: 127
Likes: 0
Originally Posted by EvasiveMotorsports,Mar 11 2006, 06:47 PM
THe plastic lining was cut.... the car will be going into the body shop soon to get real flares done, front and rear. Factory s2000 is capable of adjusting the camber to a max of -2.5-2.7 degrees in front and -4.0-4.3 in rear. This setup is defintely not for everyone but if you want to run non-staggered you can go with either a +54 or +63 setup.. it will give you a lot more clearance around the fender.
mike
jay,
the black ones were staggered setup.. 17x7.5+33 17x9+40
mike
jay,
the black ones were staggered setup.. 17x7.5+33 17x9+40
i know the rears will fit with a minor rubbing issue since a friend of mine runs a staggered setup with 17x9 +54 at the back. it is the front that i have major concern with
Thread Starter
Former Sponsor
Joined: Nov 2004
Posts: 10,605
Likes: 38
From: Los Angeles
fronts need to be rolled or cut... and def trim the plastic lining.. other then that it should be ok... assuming your car is not slammed on the ground.
turbopwr- all ce28s say that on the rim.. dont know why.. its 5x114
mike
turbopwr- all ce28s say that on the rim.. dont know why.. its 5x114
mike
