s2k_cy

I will appreciate some photos with Downforce front wide fenders 30mm with 17x9''+40 (Ce28n if possible)

AlvinHuyN

You need to be running +30 or +25 if you want it to look flush. I have those fenders on 17x9+40 and I am also running a 15mm spacer to clear my stoptechs and it's sitting flush on 245s right now. You could get away with +30 if you run 255s.

Don't mind the nasty front wheel gap - was still adjusting it's sitting lower now and is more flush because of the new height. So this is 17x9+40 +15mm spacer = +25.

s2k_cy

nice pic and a VERY nice car you got there!! No I don't want the flush look. I am just curious how will look with out spacers. I am gonna use 255 tyres all around with 17x9''+40 all around. The main purpose of the car is ''track car''. for the moment I don't have plans for bbk, so I wont bother with spacers.

according the following link, on the front the wheel will poke out 39,4mm from my current setup

front http://www.willtheyfit.com/index.php...2=9&offset2=40

and on the rear the wheel will poke out 23mm.

Rear http://www.willtheyfit.com/index.php...2=9&offset2=40

Now, for the rear I bought the rear 25mm voltex overfenders, and for the front I am waiting the downforce front fenders. As for camber I am going to use -3,2 on the front and -2,8 on the rear (according on my tyre temperatures- inside, middle, outside)

Anw I am thinking that I was a little be afraid to order 17x9''+35 and now I am afraid that I was wrong and the wheel will be located fairly inside the fender with 17x9''+40 and 255 tyre, that's why I am asking for a pic!!!!

AlvinHuyN if you have a pic with out the spacers will be perfect. You have the same wheel specs also on the rear???

AlvinHuyN

Thanks bro!

Track or not shouldn't matter with this setup. I still clear perfectly fine with the spacer and I've done canyon runs with very steep roads and no issues at all - I did it at 1.5 finger gap (lower than the pic above).

I'm just saying you need a +30 or +35 front or it will look too sunken in. I see people with stock fenders running 17x9+40 all day long with 245s so with an additional +30 you can run 255s and +30 easily!

I don't have any pics without the spacer because my BBK is too damn big and it will hit the bbk for sure so I can't help you there. I believe the evasive car was running +22 RE30 and 255s with downforce fenders and it fits perfectly fine.

My rear wheels are the same spec 17x9+40 I'm running square 245s Hancook Ventus Evo V12 all around.

s2k_cy

fender work on the rear???

as for the front, that's what I am afraid, that will look too sunken in!!!!

thanks for all the infos

AlvinHuyN

NP bro, definitely too sunken in for front with the DF fenders - you will want to run spacers or more aggressive offset.

Rears rolled flat (completely flat) not flat like people are saying but flat where you will need a repaint flat lol. Car was repainted right after the fender work was done. I was able to fit 17x9+30 on the rears with 245s and zero rubbing.

s2k_cy

thanks a lot for all the infos. So 10mm spacers is the ONLY WAY!!!!

clarkster009

No, it's not too sunken in... Imo. Here is 17x9 +38



https://www.s2ki.com/s2000/topic/691.../page__st__125

s2k_cy

it looks perfect in my eyes, thnx for the link, I don't think 2mm will make any difference (+38 car in the link - +40 my wheels)

clarkster009