Ok, latest addition to the engine bay is my heatshield from s2kaccessories.com. It's pretty much like the ztec ones only not as much. Anyway, ever since I got my crossmember cover I've been itching to get some more CF stuff on there. I don't care for unpainted hoods or trunks so the engine bay to me is the best place to show off unpainted CF.

I know, I know, the heat shield does practically nothing for me since I'm not running a stock intake box, but I needed something to match the other stuff





Now, I'm just waiting for their CF fuel injector cover and I'll be set....well for a bit anyway

 

Very nice, I like it

 

Is it an injector cover, or Coil cover? If it is a coil cover be careful the bolts like to work themselves loose.

Otherwise, lookin good.

 

Thanks. Don't know what a coil cover is. The "injector cover" that he's coming out with will replace the black plastic that's over the fuel rail. Kinda like the one Muz sells, only it will be in CF.

 

Looks this,but C.F.:




Where did you get the crossmember cover?

 

Same place. S2kAccessories.com

They just sell them plain. I added the S2000 plate to the top of it to finish it off. Makes it seem somewhat stock imo.

 

Lookin nice

 

Very nice.!!!
How does it install?double face tape,?they say no drilling.
and,is the name plate from a door sill?

 

Yeah, I got the name plate off a used door sill. You can run across one every now and then for around $30 or so.

The cover just snaps on really from the tension on the sides. The fit is tight enough so it won't come off by itself, but not hard to put on either. You just press it on really. I've done a track day with it and it didn't budge at all. I guess you could put tape if you wanted to, but I haven't had any problems.

 

Want to keep the stock airbox,as I have a C,F,cover on the way,but would like to hide that halfpainted cross member;probably would choose Al.
Do you think,It could fit,without removing the airbox?