My front driver side endlink broke and now its time to get a replacement. My question is, does every just use the oem or get to aftermarket.

 

Save some money and make your own!
https://www.s2ki.com/forums/index.php?showtopic=807081

Just needed 2 Female and 2 Male endlinks for a 10mm bolt, couple of 35mm 10mm bolts, and few lock nuts.

I should have mine done by Friday, getting the endlinks shortened so I can get more adjustment out of them when I lower the car.

May be a bit more clicky though.

Don't want to make them Saner sells the same things and you can get them from Outlaw Performance.

 

Depending on the length of the OEM end links, you might be able to just replace the 1 broken end link with 1 adjustable end link from the link above.

 

Mine broke as well, I just got a new one from Shucks for $30, instead of the $63 from honda. Seems to be holding up fine