I am thinking about getting the espelir ADS, the Eibach or the Swift springs. If I do the espelir springs and I have the front lip will my car be to low and I'll be dorking up my front lip all over the place.

Can anyone comment who has the AP1 or AP2 OEM front lip and these springs.

Also feel free to comment on any of the springs above. They all seem to get good feedback. I mostly drag race 1/4 and my goal is to eliminate wheel hop. Other mods are list below.

 

You will be fine just drive slanted when you try and go up a steep hilll

 

It's going to be pretty damn low. When I had this combo I had to tip-toe up every bump and driveway.

 

With my espelirs, front lip, and splitter I have a 3-4 inch clearence in the front. You'll eventually mess up the lip whether its a speedbump or crappy road.

 

Yo, whenever you lower you need to be careful, just know that you will look better than most when you scrape!

 

So I see your gonna try it with your set up, there has got to be more people with these springs and a front lip who can comment.

 

you will be fine. I have the springs and ap1 lip and it was fine until I hit a rabbit going 75. Now I have ap2 front and lip and its not that low.

 

i'd say fine as long as you aren't retarded.

 

How do you loke the Eibach set up I was also thinking about those swift or tein

 

i have espelir springs and ap1 front bumper with lip, but i dont scrape as much as the underbody does, i do have to go up steep driveways at an angle but other than that, my front has good front clearance