Replacing Invidia N1 Exhausts
#11
From memory my Tanabe Medalion Touring behind a Berk 63.5mm high flow cat registered at 95dBA on a calibrated OSHA standard noise meter about 2 feet from the exhaust tips. Q300 was over 105 behind the same cat.
-- Chuck
-- Chuck
#12
Site Moderator
Yeah I have had several loud exhausts. I have never care how loud the car is outside as I don’t really hear that. The drone however is what makes my ears and head hurt after just a few mintutes.
#13
^^Yes Its just that drone...
Gonna fit a TP and re install my concept G <have tried it with Berk HFC>=drone.
if not better.
Next is to fab a Helmholz into the TP
https://www.s2ki.com/forums/s2000-un...nsions-510969/
Gonna fit a TP and re install my concept G <have tried it with Berk HFC>=drone.
if not better.
Next is to fab a Helmholz into the TP
https://www.s2ki.com/forums/s2000-un...nsions-510969/
#14
Ok so the Invidia N1 sounded amazing and to be honest being a loud boi is actually pretty fun. But once Im jn the car for longer than 30 minutes the fun turns into a migraine. Either Im too low in the rpm and I cant talk to the person next to me, or to keep it manageable Im between 4-5k rpm wasting gas, again I daily drive this.
So tldr, I want to be a rumbly boi when idling, a rowdy boi when Im sending it to 8krpm, but also not too loud that I cant talk to the person next to me.
And like I said those Tanabe Touring and G Concept look good. Im now also looking at Greddy TI-C Dual systems.
Why dont people post decibel levels itd really help lol
So tldr, I want to be a rumbly boi when idling, a rowdy boi when Im sending it to 8krpm, but also not too loud that I cant talk to the person next to me.
And like I said those Tanabe Touring and G Concept look good. Im now also looking at Greddy TI-C Dual systems.
Why dont people post decibel levels itd really help lol
#15
^^Yes Its just that drone...
Gonna fit a TP and re install my concept G <have tried it with Berk HFC>=drone.
if not better.
Next is to fab a Helmholz into the TP
https://www.s2ki.com/forums/s2000-un...nsions-510969/
Gonna fit a TP and re install my concept G <have tried it with Berk HFC>=drone.
if not better.
Next is to fab a Helmholz into the TP
https://www.s2ki.com/forums/s2000-un...nsions-510969/
Thread
Thread Starter
Forum
Replies
Last Post
dylanu
S2000 Modifications and Parts
68
12-08-2016 03:11 PM
atenzany62
S2000 Modifications and Parts
26
05-31-2015 08:55 PM
kayma
S2000 Modifications and Parts
15
01-15-2012 07:03 PM