Urge

Flow Rear Rotors Launch Buy is up.

User 121020

Good looking product, Patrick.

What is the thickness of the rotor faces?

A couple of things I noticed on your page...

1. I imagine the hat material should be "AL 6061-T6" instead of "6160-T6"
2. The stock rotors weigh ~10 lbs, contrary to the 11 lb forum myth; so, weight saving is ~2 lbs per rotor assembly

Urge

The thickness of the rotor faces is 4.75mm

1. You are correct, I should have caught that with my Masters Degree in Material science but I have minor dyslexia too..
2. Changed. As you noted I ran with the myth vs weighing them myself

Thank you for the info and comments!!

sillyboybmxer

Cant wait to see this exhaust

s2k4life_az

Any pics of the exhaust? I'm in the market and want to consider this among some others.

Urge

A lot of people have asked for pictures of the exhaust. At this time we are testing fitting the mid pipe to a T1R EM Sparrow so we don't have pictures of what our exhaust will look like. We will use the same round mufflers with 70mm straight tips vs dolphin tips/ turned down tips.

The best place to visualize the exhaust is the current T1 Sparrow with oval mufflers. My apologies for the poor replies but I hope that helps.

Topplayer

my guess it would be close to this (correct me if I am worng)






Pictures taken from this thread
https://www.s2ki.com/s2000/topic/326...-dual-exhaust/

Urge

Close, but those tips are wider than 70mm, I think they expand out to 90 or 100mm. Our will be straight back 70mm.

We will also use oval mufflers vs round.

iDomN8U

But straight

Urge

Exactly