URGE designs S2000 Street & Track Build
10-13-2014, 11:58 AM
#771
Registered User
10-14-2014, 11:49 AM
#772
Anyone here running the AT Power ITB's from Urge? I'm considering them for my winter build. It's between 54mm Hayward's, 60mm Kinsler's or the ATP's.
Patrick, what is the current lead time for a set of your ATP 52mm itb's?
Patrick, what is the current lead time for a set of your ATP 52mm itb's?
10-14-2014, 12:27 PM
#773
Sponsor
Thread Starter
Are you still running DBW on your race car?
The reason why I ask is the others don't have DBW?
We flow the same as 60mm Kinslers at smaller diameter so we have quite a bit more velocity.
http://urgedesigns.com/intake-air-flow-graph.html
__________________
10-14-2014, 12:32 PM
#774
Hey Patrick, I've lost my patience with Hondata.
I'm going to ditch the DBW system for a cable setup, installing an AEM Infinity and calling it a day!
Yep, I saw the flow data on your site. The 60mm Kinsler's have the throttle plate very far from the head compared to the ATP's. Assuming a similar runner taper, the difference in throttle size is really just a number.
I'm going to ditch the DBW system for a cable setup, installing an AEM Infinity and calling it a day!
Yep, I saw the flow data on your site. The 60mm Kinsler's have the throttle plate very far from the head compared to the ATP's. Assuming a similar runner taper, the difference in throttle size is really just a number.
10-14-2014, 12:36 PM
#775
Sponsor
Thread Starter
We are moving to an oval design to keep costs from increasing and our latest design in being cut as I write this, if they flow test the same or better as we expect it, we will release it. Typically 4 weeks once Generally available with custom color and horn length options for your set-up.
__________________
10-14-2014, 12:43 PM
#776
Oval! Bad ass... I remember when Ferrari was using oval throttles on their F1 engine.
I'm gonna start finalizing my winter build next month. Hopefully you'll have the new design tested by then.
I'm gonna start finalizing my winter build next month. Hopefully you'll have the new design tested by then.
10-16-2014, 08:51 AM
#777
Ok, so some posts are removed and I have PM'd bow1build. There is a customer feedback section for Urge feedback. If any of you have any questions on why your post was removed, send me a PM. Let's keep this on topic.
Thanks,
Kerm
Thanks,
Kerm
10-30-2014, 01:10 PM
#779
Sponsor
Thread Starter
All this thread has been going a long time and it no longer reflects the projects that we are focused on.
We will are starting a new thread linked here and we will be closing this thread.
Moving forward, we are no longer working with or affiliated to Endyn.
Currently Endyn has the best S2000 head port design in the industry. If you are interested in headwork, contact Endyn Directly.
We will are starting a new thread linked here and we will be closing this thread.
Moving forward, we are no longer working with or affiliated to Endyn.
Currently Endyn has the best S2000 head port design in the industry. If you are interested in headwork, contact Endyn Directly.
__________________
Thread
Thread Starter
Forum
Replies
Last Post