Front sway bar for AutoX
#11
Registered User
Join Date: Dec 2000
Location: San Diego
Posts: 1,821
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Sideways
Are they both in relation to a stock bar or is one of them compared to the Mugen bar?
Are they both in relation to a stock bar or is one of them compared to the Mugen bar?
Swaybar, Front Adjustable (S2000)
$749.95
Coming Soon!
Designed especially for Stock class autocrossing.
5 position adjustment from 27% to 124% stiffer
than stock in 15% steps. Includes billet aluminum
mounts. Front only. Such a unique design that we've
applied for a patent on it!
Due in Mid-December.
Installation time: 1 hour
$749.95
Coming Soon!
Designed especially for Stock class autocrossing.
5 position adjustment from 27% to 124% stiffer
than stock in 15% steps. Includes billet aluminum
mounts. Front only. Such a unique design that we've
applied for a patent on it!
Due in Mid-December.
Installation time: 1 hour
Only thing I know for sure is that the prototype bar worked. If the design stiffness has changed from that point I'm going to be a bit upset, because that's the info I used to make my purchase. The only issue I understood there to be with the bar was that of the end links rubbing on the shocks, which I have been told is resolved.
Guess we'll find out soon...
#12
Registered User
I sent 'em an email the other day and the response was that the current percentages are correct. Based on other folks' computations it appears that the first one or two settings would equal the Mugen bar (the calcs show ~34% stiffer than stock).
No info on release date - mine is on order...
No info on release date - mine is on order...
#14
Registered User
All I can say is that I ordered via the net and got an email verification. Their emails have not indicated that they're not taking orders yet but I haven't asked.
BTW, I edited my response above while you were posting - I put in a stiffness calculation, in case you care...
BTW, I edited my response above while you were posting - I put in a stiffness calculation, in case you care...
#15
Registered User
I called a few weeks ago and placed mine over the phone. So they are taking orders. The word from Mike at that time was the bars were at the powdercoater and they were finalizing the endlink issue. I'd say they be shipping sooner rather than later!
#17
Registered User
Join Date: Oct 2000
Location: Catonsville
Posts: 445
Likes: 0
Received 0 Likes
on
0 Posts
does anyone who's getting the Comptech want to sell their used sway bar? (non-stock) I don't think I'm at the point where I'll be able to tell the difference between Mugen and Comptech yet. But I'm planning to be a bit more serious this year
#19
Registered User
Join Date: Jun 2001
Location: jimisapostwhore
Posts: 3,477
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Mack
S2R-
I think most of us are running 225's fr 245's rear although some have used 265's w/ the stock bar.
S2R-
I think most of us are running 225's fr 245's rear although some have used 265's w/ the stock bar.
#20
Registered User
Join Date: Oct 2001
Location: San Francisco
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE]Originally posted by jzr
[B]
From their site, currently:
I'm guessing the 15% was left over from the previous numbers, since it works in 5 steps with 13.6% (close enough to 15%) changes.
[B]
From their site, currently:
I'm guessing the 15% was left over from the previous numbers, since it works in 5 steps with 13.6% (close enough to 15%) changes.