Lap Timers?

Reply Subscribe

Thread Tools

Oct 13, 2016 | 03:13 PM

#11

BoostedE21

Thread Starter

Joined: Apr 2013

Posts: 309

Likes: 0

Thanks for the feedback guys.

Oct 13, 2016 | 03:28 PM

#12

kapao818

Registered User

Joined: Jul 2006

Posts: 29

Likes: 0

From: SoCal

if you decide to use your phone, i would suggest getting a 10hz external gps unit. This will give more accurate gps data logs.

Oct 13, 2016 | 06:03 PM

#13

slowd16

Joined: Jul 2009

Posts: 1,535

Likes: 9

Quote:

Originally Posted by BoostedE21

I want something more that just a timer. I want data. I had a friend loan me his qstarz and i liked that the screen turned green or red in sectors telling you if you are faster or slower. I also like to pull the data to see how that lap went and where improvements can be made. Not sure if AiM Solo can do that.

It can but wont have colors. It will show +/- time differential off your best time and give you a predictive current lap. I've been using my solo for about 4-5 years now. My only regret is its a non-DL. Wish i had the DL to wire into my Haltech for more data in one spot instead of two.

Oct 14, 2016 | 02:16 PM

#14

InsaneSp

Joined: Jun 2005

Posts: 1,481

Likes: 27

From: Charlotte, NC

Solo DL on the haltech via CAN cable. Made a preset view that shows predictive lap, last lap, and best lap that session. I'll eventually get a Smartycam HD because it make data overlay automatic.

Oct 14, 2016 | 08:05 PM

#15

circuitclub

Joined: Sep 2008

Posts: 981

Likes: 27

Can you set up water/oil temp and oil pressure with your haltech?

Oct 14, 2016 | 08:05 PM

#16

circuitclub

Joined: Sep 2008

Posts: 981

Likes: 27

Can you set up water/oil temp and oil pressure with your haltech?

Oct 15, 2016 | 07:51 AM

#17

slowd16

Joined: Jul 2009

Posts: 1,535

Likes: 9

Quote:

Originally Posted by circuitclub

Can you set up water/oil temp and oil pressure with your haltech?

Water temp is already built in from be factory sensor. You can add inputs for oil pressure and temp and also setup safety parameters to shut the motor down.

Oct 15, 2016 | 11:56 AM

#18

circuitclub

Joined: Sep 2008

Posts: 981

Likes: 27

Very interesting, so I can use the CAN system to hook up oil data?

I may try this out and ditch my Defi gauge system

Oct 15, 2016 | 08:58 PM

#19

anorexicpoodle

Joined: Nov 2011

Posts: 846

Likes: 66

Quote:

Originally Posted by circuitclub

Very interesting, so I can use the CAN system to hook up oil data?

I may try this out and ditch my Defi gauge system

Yep I did exactly this with my Kpro

http://www.s2ki.com/s2000/topic/1153...feed-tutorial/

Realistically, wiring up CANBUS from any other standalone shouldnt differ too much.

Oct 16, 2016 | 06:20 AM

#20

justin3

Registered User

Joined: May 2016

Posts: 22

Likes: 1

+100 for AiM Solo I'd recommend the DL but that's just me. It's better to have the extra capability and not need it then want it later and have to spend the money over again.

Reply Share

First
Prev
2 / 3
Next
Last