Spring rate recommendation
#1
Registered User
Thread Starter
Join Date: Sep 2005
Posts: 6,790
Likes: 0
Received 0 Likes
on
0 Posts
Spring rate recommendation
I recently purchased a set of Ground Control coilovers and Koni Yellows for my S2000. When I placed the order, I wasn't asked what spring rates I wanted. GC ended up making the spring rates 325 front / 375 rear. There is a GB thread for these GC coilovers and I noticed that most people are recommending 375 front / 325 rear.
I am looking for confirmation that I need to have the springs swapped so that they are 375 front / 325 rear. Thanks in advance!
I am looking for confirmation that I need to have the springs swapped so that they are 375 front / 325 rear. Thanks in advance!
#2
I am going with 375 F and 324 R with the Koni's.
#3
Registered User
Thread Starter
Join Date: Sep 2005
Posts: 6,790
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by gomarlins3,Mar 22 2006, 09:11 AM
I am going with 375 F and 324 R with the Koni's.
#4
Registered User
Join Date: Feb 2003
Location: Socal
Posts: 15,831
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2QYK4U,Mar 22 2006, 08:35 AM
As are most of the people I have seen. I wonder why Ground Control is recommending the opposite setup.
#5
Registered User
Thread Starter
Join Date: Sep 2005
Posts: 6,790
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by HunterEz,Mar 22 2006, 09:43 AM
Probabaly becase stock 00-01 and 04+ cars have a slightly stiffer rear spring rate. BTW, the spring sizes should be the same so you can just flip front to back if you want to change which side is stiffer.
Thread
Thread Starter
Forum
Replies
Last Post
DavidNJ
S2000 Brakes and Suspension
7
04-25-2015 12:02 PM
shehatezme
S2000 Brakes and Suspension
1
12-04-2010 04:09 PM