S2K vs EVO9
Originally Posted by HvRRZ,Nov 13 2006, 02:37 PM
stock evo> stock s2k fom dig
stock s2k> stock evo from a roll(only one that is close is the evo9-drivers race)
stock s2k> stock evo from a roll(only one that is close is the evo9-drivers race)
From experience, a stock S2k does not even come close to a stock IX from a dig or roll. Evo IX's trap ~107mph, so unless you also hang with LS1 powered cars you are not going to keep up.
Originally Posted by Spartikus,Nov 13 2006, 04:02 PM
Do you speak from experience or are you just quoting something you once heard from some guy who had a friend who raced one once?
From experience, a stock S2k does not even come close to a stock IX from a dig or roll. Evo IX's trap ~107mph, so unless you also hang with LS1 powered cars you are not going to keep up.
From experience, a stock S2k does not even come close to a stock IX from a dig or roll. Evo IX's trap ~107mph, so unless you also hang with LS1 powered cars you are not going to keep up.
Originally Posted by Spartikus,Nov 13 2006, 05:02 PM
Do you speak from experience or are you just quoting something you once heard from some guy who had a friend who raced one once?
From experience, a stock S2k does not even come close to a stock IX from a dig or roll. Evo IX's trap ~107mph, so unless you also hang with LS1 powered cars you are not going to keep up.
From experience, a stock S2k does not even come close to a stock IX from a dig or roll. Evo IX's trap ~107mph, so unless you also hang with LS1 powered cars you are not going to keep up.
I've run one evo9 mr 20+ times all with the same results. I've also been able to pull on him everytime and at the time only having intake flywheel test pipe. So somewhat stock. Not sure if my mods did anthing to this but my fourth gear pull would put me ahead about a car on him, afterwards I had a slow pull in fifth until it looked like in sixth I would stop pulling but would keep my distance. I think a stock S would be a dead on race between one if not having the advantage in the first couple gears from a roll.
Thread
Thread Starter
Forum
Replies
Last Post



