ASM Technical Thread! Ask your ?s here!
Registered User
Joined: Jan 2007
Posts: 1,724
Likes: 0
From: Knoxville Area
Originally Posted by JONDEMANDsales,Jul 18 2007, 06:39 PM
I don't know if you would like working for a Japanese company...... 
It can be kinda difficult sometimes.
It can be kinda difficult sometimes.
Its a totally different experience! That can be very difficult, but I like it. It's a great challenge. I wish I could pick up more Japanese.
Thread Starter
Banned
Joined: Sep 2006
Posts: 93
Likes: 0
Originally Posted by Fuelrush,Jul 20 2007, 12:14 AM
Its a totally different experience! That can be very difficult, but I like it. It's a great challenge. I wish I could pick up more Japanese.
Thread Starter
Banned
Joined: Sep 2006
Posts: 93
Likes: 0
Please direct all sponsorship questions/inquiries to the following thread. I just want to keep this thread clean and simple.
https://www.s2ki.com/forums/index.ph...T&f=1&t=508680
https://www.s2ki.com/forums/index.ph...T&f=1&t=508680
Registered User
Joined: Jul 2005
Posts: 1,829
Likes: 0
From: Canada
What HP difference would you say are between the ASM 70mm and 60mm exhausts? Im hearing different opinions, anywhere from 2hp to 8hp, can you confirm? Im wondering wether it's worth going to the 60mm from a 70mm.
Joined: Jul 2006
Posts: 6,419
Likes: 0
From: The Antagonist
Originally Posted by GPW03,Jul 21 2007, 09:42 AM
What HP difference would you say are between the ASM 70mm and 60mm exhausts? Im hearing different opinions, anywhere from 2hp to 8hp, can you confirm? Im wondering wether it's worth going to the 60mm from a 70mm.
Registered User
Joined: Jun 2005
Posts: 1,072
Likes: 0
From: Arlington, VA
Originally Posted by GPW03,Jul 21 2007, 09:42 AM
What HP difference would you say are between the ASM 70mm and 60mm exhausts? Im hearing different opinions, anywhere from 2hp to 8hp, can you confirm? Im wondering wether it's worth going to the 60mm from a 70mm.
-Will
Registered User
Joined: Jun 2005
Posts: 1,072
Likes: 0
From: Arlington, VA
FTW - I just dynoed my MY04 (on a Dyno Dynamics AWD (2400 whp steady state) quad retarder loading dyno) with just an Invidia test pipe and the ASM 60mm SS single. My numbers were 206.9whp and 138.8 ft/lbs of torque.
There are only only two of these dynos in the country. Supposedly they read 5-15% lower than Dynojets.
The guy who dynoed after me in his MY01 (comptech cai + J's 70mm header back + Apexi V-AFC II) put down 183whp pretune and 190whp post tune.
-Will
There are only only two of these dynos in the country. Supposedly they read 5-15% lower than Dynojets.
The guy who dynoed after me in his MY01 (comptech cai + J's 70mm header back + Apexi V-AFC II) put down 183whp pretune and 190whp post tune.
-Will
