Ginormous
#1
Registered User
Thread Starter
Join Date: Nov 2005
Location: los angeles
Posts: 521
Likes: 0
Received 0 Likes
on
0 Posts
Ginormous
Hey all jsut wanted to drop another accolade for Tony Fuchs..(hes over at ginormous performance)
He just did some work on my car and he went above and beyond the call of duty. If any of you need stuff done i can't reccomend him enough..honest and top rate work.
He just did some work on my car and he went above and beyond the call of duty. If any of you need stuff done i can't reccomend him enough..honest and top rate work.
#4
Registered User
Thread Starter
Join Date: Nov 2005
Location: los angeles
Posts: 521
Likes: 0
Received 0 Likes
on
0 Posts
He re-adjusted my valves and put in the oil jet bolts..
did a general look over of the car and told me a few things I should get done...He knew little tricks and tips about it as well and very reasonable.
He will be doing my clutch when I get it and if there is something that I either dont feel comfortable with ir flat out don't want to do I'll send it to him.
I know this dosen't mean much from someone. After all you don't know but ive been wrenching on cars for a while, I typically trust no one. very rarely do I find a person who is:
A. trustworthy
B. knowledgable
If this was a small block chevy I wouldn't bother taking it to any one... I don't know these engines (and for that matter the rest of the car) and there are tricks and ways of doing things that he is flat out better and more knowledgable than me or for that matter 90% of us. He's been tearing these things apart for years and knows them inside out including racing and modding them. Im not saying the dude is a god jsut very good at what he does...
he gets the thumbs up from me.. Im sure, (in fact I know) there are other people on this forum ( if they want to speak up im sure they will) who have had stuff done by him that can attest what im saying..
I'de say if your looking for someone check him out and decide for yourself...after all you don't know me from adam......
hope this was helpful...
did a general look over of the car and told me a few things I should get done...He knew little tricks and tips about it as well and very reasonable.
He will be doing my clutch when I get it and if there is something that I either dont feel comfortable with ir flat out don't want to do I'll send it to him.
I know this dosen't mean much from someone. After all you don't know but ive been wrenching on cars for a while, I typically trust no one. very rarely do I find a person who is:
A. trustworthy
B. knowledgable
If this was a small block chevy I wouldn't bother taking it to any one... I don't know these engines (and for that matter the rest of the car) and there are tricks and ways of doing things that he is flat out better and more knowledgable than me or for that matter 90% of us. He's been tearing these things apart for years and knows them inside out including racing and modding them. Im not saying the dude is a god jsut very good at what he does...
he gets the thumbs up from me.. Im sure, (in fact I know) there are other people on this forum ( if they want to speak up im sure they will) who have had stuff done by him that can attest what im saying..
I'de say if your looking for someone check him out and decide for yourself...after all you don't know me from adam......
hope this was helpful...
Thread
Thread Starter
Forum
Replies
Last Post
moebiusuk
UK & Ireland S2000 Community
13
02-12-2013 09:46 AM