I bought a front lip off of another member but it came with no hardware. Can I install with all the existing bolts from the car now or would I have to order the Installation kit from HardTopGuy for $60? Please let me know ASAP!! Thanks

 

anyone wanna answer my question?

 

you need the installation kit.

 

Thanks for the write-up!

I'm assuming because of the sticky-tape the spoiler should never need to come off separately from the bumper for front end servicing?

 

Thanks for the writeup.
A quick question: I am having trouble getting these 3 clips out in the very beginning of the steps. Could you please give me some suggestion?
Sorry, I am not very good at this..
thanks.

 

If your girl friend really loved you, she would install the lip for you.
When she is done, reward her with a mechanics tool set and a marrage proposal. Don't let this one get away, she's really going to be handy around the garage.

 

You will see small slots on the inside portion of these. Take two small regular screw drivers and pull down on these two slots. It will only move maybe an 1/8 of an inch. They do not come all the way out. Then just gently put a screw driver under the outer portion of it and work it loose.

mlc

 

oh boy. I took it to the dealership and they just muscled them out in front of me. took them about 10 mins too. these clips are pretty much destroyed I hope I will be able to put them back when I install the kit this weekend.
Thanks mlc for ur response.

 

Are there any pics like this for the 00-03 OEM lip? Someone has to have some a delf pic install like this one?

 

nice guide man!

is the lip screwing to the bumper or to the under tray and fender liner?

just wanted to confirm this since i have an ap2 front bumper but ap1 under tray and fender liner......