Well it was a nice 14 months with the windscreen, but ...

I had been having trouble with a RATTLE in the area of the windscreen or maybe behind it in the roof well while the roof was up. In addition to wading through the rattle entries in S2KI, I temporarily folded down the windscreen to see if it was rattling against the roll hoops. Later that day I lowered the top. Goodbye 7/8 windscreen, hello shorter than stock windscreen. But the broken remnant has a perfectly-formed arc, just shorter than the stock version.

Don't need all that money anyway.

 

You need to link a picture!

 

yeah, post a pic!

 

 

I used to have the full height screen and touched it with the top at least a dozen times. Luckily I always stopped the process in time. To this day, I still watch the top go down even though I have the stock plastic piece.

 

Hrmmmm....I thought that the 7/8ths screen would always clear the top up or down, and the full screen was the one you had to be careful of.....

 

Here are the pictures

Not quite as perfect as it looked from the driver's seat


The other piece

 

Oh great, i just installed one of these in my car.
Did it make alot of rattle noise while driving around ?

 

I got the cheap $20 ebay version and have lowered my top on it a few times, luckily not doing any damage. Mine rattled too until I super glued a rubber washer on each side of roll hoops to prevent the screen from vibrating. No noise since.

 

I used the supplied bumpers. I have the full height screen and it doesn't rattle at all.