I picked up my car today from an install I had done w/ the Premier p930 w/ pac-swi3 interface. The install looked great- he mounted the "led" eye on the flat portion inside the audio cover. Looks great. The only bummer part was the "audio controll" button can't work but I will live. And wouldn't you know I met another S2k owner -silver w/red. I gave him this web site for club info. I'll post pictures soon-- I am waiting for the Premier changer and Premiercomponent set to come in.

 

Special thanks to MACGYIVER for posting his install diagram for the PAC-SWI3 on his web site. It helped out BIG TIME Thanks again

 

All buttons should work with the PAC...if some aren't, you may need to change the value of that external resistor to bring the total resistance back into the recognizable range for the PAC.

 

The installer was saying that the "audio control" button was sending out too many different signals for the PAC to learn--it would not memorize any of the functions--

 

How do you change the resistance?

 

[QUOTE]Originally posted by RWIRSING371
[B]I picked up my car today from an install I had done w/ the Premier p930 w/ pac-swi3 interface.