Smoked Tails
Originally Posted by IheartS2ks,Aug 21 2006, 07:19 PM
1. Drill a 3/4 inch hole in your light housing.
2. Connect a plastic tube from exhaust pipe to aformentioned hole.
3. Turn on car.
3a. Rev the car a bit.
4. Watch the "magic" happen.
5. Remove tube and tape up the hole with "invisible" scotch tape.
6. Admire the results.
2. Connect a plastic tube from exhaust pipe to aformentioned hole.
3. Turn on car.
3a. Rev the car a bit.
4. Watch the "magic" happen.
5. Remove tube and tape up the hole with "invisible" scotch tape.
6. Admire the results.
Yep, so im going to go soon to get it done, probably later this week or early next week...
The guy said that since it was on the outside, it would have to be redone about once a year. Especially if i wash it a lot... and i do... so o well... $20 a year for smoked tails is fine with me...
The guy said that since it was on the outside, it would have to be redone about once a year. Especially if i wash it a lot... and i do... so o well... $20 a year for smoked tails is fine with me...
Thread
Thread Starter
Forum
Replies
Last Post
uhohitzluke
S2000 Under The Hood
10
Oct 20, 2014 08:21 PM




