hi guys was driving in rain earlier and noticed that water was drppin inside my car... the windows where close but water still goes inside from the rubber moulding........ what can i do to stop the water from goin inside??? thanks!!!

 

May have to get new rubber moldings. Mine were worn out and it cost me $60 if I remember correctly. I may still have the part number. Also where the molding is divided on the softop was torn.

Just wear and tear I guess.

 

Have you been treating the seals with shinetsu? Gotta do that to make sure it doesn't dry out...

 

Where can this be purchased?

 

this happened to me as well. I just thought my window wasn't closed all the way...

 

where can i buy the shinetsu???

 

hi can i get the part number? thanks!!! mine drips not from the soft top... it drips from the window guide...

 

I've had this happen on the driver's side when the top's seals don't seat on top of each other properly. It would drip when the water was flowing toward the front of the car (i.e. braking). I fixed it by just raising the top about half way and then lowering it. That allowed the seals to re-seat and all was well.

 

tried it!! it did work!! thanks guys!!!! but still i ordered a new set of rubber mouldings for the windows and the softop!! thanks!!!!