Hey guys. Just wondering if you have any leads on a company that produces tailor made engine blocks. I'm looking to "make" my own engine and see what happens. Until I can source a company the does this, I'm trying not to throw a ton of details out. I have most top end stuff completed but I do not have a proper crankcase or crankshaft. I know there are tons of fabricators/people who know peopl on here so I thought I would throw it out there.

-Collen

 

Dart Machine makes a Honda B series block and cyl head,but I'm not aware of anyone wou offers an F series

link~ http://www.dartheads.com/products.ph...key=6&x=31&y=8

 

If by "make" your own engine you mean produce engine components or event a crank and block your going to need to find someone with a 5 axis cnc machine and be prepared to spend a ton of money, who does it is really not all that important since there is almost no human interaction with the machine although the material you chose will be... If you mean buy a bunch of existing components (sleeves, pistons, con rods, crank, etc) and put them into a "custom" engine any competent machine shop can do what you need.