Hi~~
I would like to know if anyone use J's Racing N1 exhaust?and how is it compare to Spoon N1 muffler?which one is better for race track?

 

send me your email address and I can send you an mpeg of the J's. that's about all I can do, but my suggestion is.. if you are planning on getting either of these - please keep it on the track - they are VERY loud.

 

my e-mail is chungtaho0918@yahoo.com.tw
thanx for your help....

 

I don't know man. At my last AutoX there was an S2000 with the J's and there was one with no muffler at all. Neither seemed particularly loud to me, at least at a distance. On my last run the one with the open pipe was right in front of me, and it wasn't deafening or anything when it took off.

That's just my impression.

Robin.

 

[QUOTE]Originally posted by fieryermine
[B]I don't know man. At my last AutoX there was an S2000 with the J's and there was one with no muffler at all. Neither seemed particularly loud to me, at least at a distance. On my last run the one with the open pipe was right in front of me, and it wasn't deafening or anything when it took off.

 

If the J's or Spoon's is anywhere near the level of Mingster's N1, then you can hear it almost 1/2 mile away, if not further. Which, to me, means its pretty damn loud.

Puts everyone who owns a truck and thinks duals are louder than single exhausts in their place.

Blake

 

The J's Racing exhaust is the same exhaust as the Buddyclub Racing Spec muffler. The price for the Buddyclub is cheaper too.

 

AJ PwR,

Can you explain how the J's Racing exhaust and Buddy Club exhausts are the same? Are they both made in the same factory or do you mean they are the same styling, spec, etc?

Thanks

 

The J's Racing's N1 exhaust is made by Buddyclub. This info were given from Buddyclub when I visit to Japan
in Jan.

Here are the specs :

Buddyclub Racing Spec 3 exhaust
-65mm OD
-weighs 7.8kg
-full stainless 0.8mm thickness piping

J's Racing
-60.5mm OD (J's Racing Spec)
-weighs 8.6kg
-full stainless 1.0mm thickness piping
-exact same muffler as Buddyclub 1.0mm thickness for the muffler
-same tip size and angle cut.

I will try to post some pics soon so that you can compare it.

 

Thanks for that info AJ PwR,
What about sound difference? Mingster stated that due to the design the Buddy Club would be "Hella Loud". Have you heard both of these exhausts on an S2? I've been reading on the board that the J's exhaust (although loud) has a very nice sound to it. I haven't heard any commets on the exhaust note for the Buddy club. I would rather go with the BC Spec III if they are both essentially the same since it comes with a silencer and is alot cheaper.