Mark this thread as Unsold
FS:Greddy Emanage Blue
10-04-2010, 12:53 PM
#1
Registered User
Thread Starter
Join Date: Jan 2008
Location: Richmond/Vancouver
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
FS:Greddy Emanage Blue
Greddy Emanage Blue for sale
Info : From greddy's web site
Vtec Control
Adjustable Vtec Control for RPMs, Engine Speed, Hold Between Gear Shifting
Unlimited Vtec Adjustment
For Vehicles with Vtec Engine Swaps, The eManage Can be used to Activate V-TEC for a Non-Vtec ECU.
Unmatched Fuel Control, Richen or Lean ±10% out the Fuel Mixture when Vtec Engages
Air & Fuel Control
For Larger Mass Air Flow Meters or Throttle Bodies, you can adjust the Air Input Signal ±20% to Correspond with the Correct Proportional Amount of Fuel Delivery
Fuel Delivery can be Adjusted at 5 Different RPM Points for use with Larger Injectors
Auto Idle Correction to Prevent Engine Stalling
Fuel / Boost Cut Controller Included to Allow Maximum Horsepower from the Turbo and Prevent Lean Run at Top end RPMs. Optional Boost Sensor & Harness allows for More Refined Turbo Interaction & Control
eManage Can Control up to 2 Additional Injectors that can be activated by RPM or Boost Pressure (Optional Harness Required).
Also i'm letting go the Boomslang harness which works for for s2000 (2002 - 2005 ) model for $50
please note that if you are going to use this for turbo application , you would need a "Ignition control harness which cost about $30 bucks "
Info : From greddy's web site
Vtec Control
Adjustable Vtec Control for RPMs, Engine Speed, Hold Between Gear Shifting
Unlimited Vtec Adjustment
For Vehicles with Vtec Engine Swaps, The eManage Can be used to Activate V-TEC for a Non-Vtec ECU.
Unmatched Fuel Control, Richen or Lean ±10% out the Fuel Mixture when Vtec Engages
Air & Fuel Control
For Larger Mass Air Flow Meters or Throttle Bodies, you can adjust the Air Input Signal ±20% to Correspond with the Correct Proportional Amount of Fuel Delivery
Fuel Delivery can be Adjusted at 5 Different RPM Points for use with Larger Injectors
Auto Idle Correction to Prevent Engine Stalling
Fuel / Boost Cut Controller Included to Allow Maximum Horsepower from the Turbo and Prevent Lean Run at Top end RPMs. Optional Boost Sensor & Harness allows for More Refined Turbo Interaction & Control
eManage Can Control up to 2 Additional Injectors that can be activated by RPM or Boost Pressure (Optional Harness Required).
Also i'm letting go the Boomslang harness which works for for s2000 (2002 - 2005 ) model for $50
please note that if you are going to use this for turbo application , you would need a "Ignition control harness which cost about $30 bucks "
06-19-2012, 10:26 PM
#4
Registered User
Join Date: Oct 2011
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
how much???
I have a 2004, would it work on it?
what other parts will i need if am trying to install with no forced induction, just cold intake and full exhaust system? maybe bigger injectors.
what other parts will i need if am installing a Turbo charger?
I have a 2004, would it work on it?
what other parts will i need if am trying to install with no forced induction, just cold intake and full exhaust system? maybe bigger injectors.
what other parts will i need if am installing a Turbo charger?
Thread
Thread Starter
Forum
Replies
Last Post