When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Small Fortune Racing Enterprises ("Gendron") Monster Bar with Ball Bearing mounts $900 ($1800 new) - largest front sway bar on the market (pic below is a comparison of the Gendron Bar top and OEM below) - ball bearing mounts don't require maintenance and allow the bar to move with very little friction -- you will notice the lack of friction right away when you mount it (vs. urethane) - mounting brackets are SOLID - no worry about breaking these with hard cornering - $900 with SFRE Teflon-lined double heads-joint end links (1 new and unused)
Wayne 25O-8O8-15O2 (call or text)
From the SFRE website:
Small Fortune Racing builds the most successful front sway bar kit for the S2000 Honda. Our customers have had tremendous success at Solo, track and on the street. In production since 2001, 12 Open National Champions in Solo (as of 2013) and 2013 National Pro Solo Overall Champion Nick Barbato have used our bar kit. The SFRE Bar is the one to run.
Our sway bar is a straight splined bar, 1.25" outside diameter. It has machined and formed arms with six adjustment positions. Three bar stiffness’, solid, .25" wall and .188" wall are available. It comes standard with grease-able urethane chassis mounts and high angularity spherical jointed end links with Grade 8 hardware. Bars and arms are powder coated. Black bars are generally in stock. Other colors are available by special order. Pricing for the black bar is $699 plus shipping. We also provide suggested alignment settings with this kit. Installation requires no modifications to the car and can be performed by the average enthusiast.
For drivers with stock springs looking for the last bit of performance we offer theMonster Bar. This custom built 1.375” OD hollow bar is the stiffest S2000 bar we sell. Add this bar to sticky tires and race shocks and you will be ready for the Lincoln concrete. The Monster Kit is $899 complete with standard mounts, links and hardware.
Fitting all of our S2000 front bars are the sealed ball bearing mounts.
These rugged, no maintenance parts have extremely low friction and give the driver the best feedback possible. These mounts are 300% stiffer than the stock Honda chassis mounts and use self aligning steel ball bearings. Highly recommended for all S2000, essential if running the Monster bar. Priced at $325 in black powder coat.
11-15-2021, 11:36 PM
FS: Small Fortune Enterprises “Gendron” bar
