Mark this thread as Unsold
TX amarillo -inlinepro stg2 race kit
FS: inline pro stage 2 race kit
name: Ricardo Arpero
Price: 5,500 *OBO*!
Location: Amarillo tx
Contact :806 420 72 98
Hey guys time has come for me to sell my turbo kit going a different rout with my car and the turbo/engine have to go, i really want to sell the whole kit for now i might part out later if it doesn't sell , this is the inline pro stage 2 race kit with a 67/65 precision turbo t4 with a billet wheel, kit will include everything you need to run the turbo kit from fuel to standalone and even full exhaust if needed kit ran perfect before i pulled it only things you will need is to weld a 10an to the oil pan or we can trade pans might also need some vacuum lines should be about it. figured i would post here first i wouldn't mind delivering to the dallas area will post in forced induction section once i get it all cleaned up and boxed up any questions or better pics text me!!
kit includes
inline pro stage 2 race kit with 67/65 precision with billet wheel
inline pro blow off valve
turbosmart 50mm wastegate
inline pro oil filter relocation kit
3" charge pipes
wastegate dump tube
3" exhaust
intercooler
aem mac with t1 mount
aem ems 1052 rebuilt by aem
id1000 injectors with pigtails
walbro fuel pump
omni 4 bar map sensor
turbo drain/feed earl lines
intake manifold block off plate
mishimoto oil cooler
[media]http://vid1180.photobucket.com/albums/x409/boiric/IMG_9514_zps0vq1noqg.mp4[/media]
[media]http://www.youtube.com/watch?v=3xYj-W8NHCQ[/media]







name: Ricardo Arpero
Price: 5,500 *OBO*!
Location: Amarillo tx
Contact :806 420 72 98
Hey guys time has come for me to sell my turbo kit going a different rout with my car and the turbo/engine have to go, i really want to sell the whole kit for now i might part out later if it doesn't sell , this is the inline pro stage 2 race kit with a 67/65 precision turbo t4 with a billet wheel, kit will include everything you need to run the turbo kit from fuel to standalone and even full exhaust if needed kit ran perfect before i pulled it only things you will need is to weld a 10an to the oil pan or we can trade pans might also need some vacuum lines should be about it. figured i would post here first i wouldn't mind delivering to the dallas area will post in forced induction section once i get it all cleaned up and boxed up any questions or better pics text me!!
kit includes
inline pro stage 2 race kit with 67/65 precision with billet wheel
inline pro blow off valve
turbosmart 50mm wastegate
inline pro oil filter relocation kit
3" charge pipes
wastegate dump tube
3" exhaust
intercooler
aem mac with t1 mount
aem ems 1052 rebuilt by aem
id1000 injectors with pigtails
walbro fuel pump
omni 4 bar map sensor
turbo drain/feed earl lines
intake manifold block off plate
mishimoto oil cooler
[media]http://vid1180.photobucket.com/albums/x409/boiric/IMG_9514_zps0vq1noqg.mp4[/media]
[media]http://www.youtube.com/watch?v=3xYj-W8NHCQ[/media]








Thread
Thread Starter
Forum
Replies
Last Post



