poss87

UPDATE 11/25/18

First Name: Taylor
Price: OBO
Location: Clinton, MS
Contact: PM or Email Taylorrgeorge@gmail.com

All prices are OBO and do not include shipping costs. PayPal payment method.

Comptech Adjustable Front Sway Bar - $750Price Drop! $600

Comptech 4-1 Stainless Header - $650

Enkei PF01s (17x9 +60) with 255 BFG Rival 1.5S tires. $1400 Price Drop! Wheels Only $800 Tires Only $500 combined price $1200
-Tires were autocrossed approx. 45-50 runs. There are no street miles on them and they have been stored inside my house.
-Wheels have some scratches,nicks and scuffs but are overall in good condition I would say. No curb rash

Enkei RPF1s (17x9 +45) with 255 Toyo R1R tires -SOLD
- Wheels are in excellent condition. No scratches just a couple small scuffs that can be buffed/polished.
- Tires have plenty of tread left on them. They were only used for autocross, no street miles. Tires have a late 2012 build date but have been stored inside a climate controlled room for years.

Eibach Pro Kit Springs - $100

APR Wing with low risers. - $300 with AP1 NFR trunk $400 - SOLD
- I believe the wing is a GTC-200 although I am not sure. It came with my AP1 car.
- The top part of the wing as well as the top of the trunk has a mist of clearcoat overspray on it. This makes the finish not smooth but the overspray can be buffed/polished out.
- There is a small scratch on the top of the wing (see below picture)

Wasp Composite Carbon/Kevlar Front Splitter with hardware -SOLD
- Purchased but never installed due to not being legal in my SCCA class. Includes hardware shown in pics.
- In good condition but has a small amount of resin de-lamination on the rear of the splitter. Can be fixed with alittle resin most likely.

KW V3 coilovers with OEM Strut Mounts (Freshly rebuilt in March of 2018) - SOLD
-Currently setup with 90N/mm - 514 lbf/in springs. Also included are two 110N/mm - 628 lbf/in and two 120N/mm - 685 lbf/in springs.
-The front brake hose tabs are bent back for big front sway bar clearance. They can be bent back but I am not sure if the weld will hold or not.

Comptech Titanium Serius Strut Bar - SOLD

Comptech Ice Box Intake with Filter Service Kit- SOLD

PLM Header - Removed due to wanting to sell the Comptech header instead

Berk 70mm High Flow Cat - SOLD

JVT Racing Ebay Header - SOLD

Skunk2 Catback Exhaust - SOLD
-Dent in one of muffler pipes - see pic below
-Scratches on bottom of mufflers
-If shipping is needed I will have to separate the mufflers from the primary pipe and most likely the gasket will disintegrate.

Kosei Formula SF (17x9 +62) with 255 Nexan SUR4G tires. SOLD
-Tires were purchased in the summer of 2017 and have less than 2000 street miles on them. They were used for autocross and have approx 40 runs on them.
- Wheels have some scuffs on them and one wheel has some scratches on the face and it was dropped on its face. See pics

poss87

Bump, lots of good parts still available.

poss87

Bump, updated sales listing. New parts added. Comptech header, Eibach springs, Enkei RPF1s, APR wing, Wasp Splitter

circuitclub

poss87

Its for an AP1 bumper with OEM lip 3" front extension. 1/2" thick. I looked at some old PMs with Wasp and it appears the small pealing I was referring to was a protection film and not resin.

512S2k

poss87

Enkei PF01s can be sold separately as well as the BFG Rival 1.5s tires. See updated pricing