Mr.Matchbox

As i have dialed in the highest possible setting of only 1cm / 0.39 Inch lowering, i was surprised that the Mechanic told me that he cant adjust the rear camber better, as the adjuster was at the limit.

Rear camber: L 1°55` R 1°53´
Rear toe: L 0.18´ R 0.15` Total 0.33´

Front Camber: L 0.24´ R 0.32´
Caster: L 5°57´ R 5°50´
Front toe: L 0.01´ R 0.00

Room for improvment?

So far, it feels great driving Cross-Country very spirited. Better as OEM. I dont plan to visit a racetrack, but i have mountain roads here.
Meassurment was done with a "Hunter Hawkeye" system at a formerly Honda dealership. The chief technican ("Master") also owns a Honda S2000, and most mechanics are very expirenced with Hondas, that´s why i trust these guys.

noodels

Not much front camber ? you can see what i have

Mr.Matchbox

Thank you. Maybe lower it 1cm more at the front and dial in more camber.

B serious

What is your ideal amount of camber? Its unclear if you want more negative or more positive.

There is a lot of rear toe. But if you like it, you like it.