Does anyone have Bilstein PSS install instructions, as well as exactly what OEM parts are needed? I'm having trouble finding both points of information. Thanks!

 

You're going to have to swap out the oem top hats onto your new coilovers. You'll need a spring compressor to do so I believe. Apart from that it should just be a basic remove old suspension, put in new suspension and getting the car aligned.

Pretty decent diy video. helped me when I was installing my coilovers

[media]http://www.youtube.com/watch?v=9k6LTUO6Sig[/media]

 

Thanks. Changing coilovers is the easy part. I've done it 3 times on my car.

I'm not clear on what specific parts of the oem top hat I need for the PSS kit, as well as specs like how much pre-load to use.

 

As far as parts go you'd probably use everything from 9 and above. Would probably not need 6 and 18 but im not really familiar with what comes with the PSS kit.

As for preload... generally I put zero preload on my springs. If you have the manual it should specify what they recommend for preload.

 

#6 is my challenge right now. I'm not sure if I need it or not.

 

Isn't that just a rubber shock absorber piece of sorts? I know people reuse/ replace them when fitting them on new coils