Mark this thread as Unsold
FS: Comptech Intake
Thread Starter
Registered User
Joined: Jun 2008
Posts: 278
Likes: 0
FS: Comptech Intake
First Name: MJ
Price: Posted with each item. Prefer local pickup, cash only.
Location: Northridge, CA 91325
Contact: PM
Comptech Intake
200 OBO
What you see is what you get. Needs a couple of vacuum lines. This is the older version, you won't be able to use your factory hood prop due to the shape of the box's lid. The box itself is pretty rough, it's been cut open to accomodate a 4 point front strut bar.
SOLD ITEMS:
OEM S2000 Trunk Lid WITH HOLES in Grand Prix White (GPW)
SOLD
In good condition, come off an AP2 but will fit AP1. No dents or deep scratches. Original paint with VIN intact. There are 12 holes drilled (6 on each side) to mount two different wings. I've been told that the 1st set of 8 holes are for a J's Racing wing, the 2nd set of 4 holes are for an OEM non-CR wing. Comes with working electronic trunk latch mechanism. No emblem, no third brake light, no keyhole. Pictures to come soon.
BRIDE Type FG Rails for 00-05 (pair)
SOLD
In great condition, just a little dusty. Includes OEM seatbelt receptacles to you don't have to take them off your stock seats. Driver side (LH) fits 00-09, Passenger side (RH) fits 00-05. Not willing to separate. Fits most sidemount seats; you're welcome to bring your seat over for a test fit prior to purchasing. Known to fit : Bride Zieg III, Bride Vios III, Buddy Club Racing, Recaro SPG | Won't fit : Recaro Pole Position
OEM S2000 Hardtop wrapped in 3M Di-Noc CF Vinyl w/ OEM Hardware
SOLD
In good overall condition. Wrapped in 3M Di-Noc Carbon Fiber Vinyl. Suzuka Blue paint underneath the wrap is faded so a respray will be needed if you choose to remove the vinyl wrap. Headliner separating on front left corner close to the latch, easy fix for any upholstery shop. Includes the following hardware: OEM Front Latches, OEM Rear Spikes, OEM Rear Catchers, OEM Defrost Harness
SSR Type F Wheels in Matte Black with Bridgestone Potenza RE760 Sport Tires
SOLD
Wheel specs are 17x8.5+40 Front, 17x9.5+40 Rear. Tires are 215/45 Front and 245/40 Rear with a good amount of tread left. Semi-aggressive setup as seen by the concave rear wheels. Depending on ride height, will need fender rolling and rear bumper tab relocation. Near mint condition, as shown in the pictures. Gold SSR valve stems included. Sorry, not willing to separate wheels/tires.
Megan Racing 2-Piece Driveshaft Spacers
SOLD
Complete set in excellent condition; includes longer nuts and bolts necessary for install. Gets rid of vibrations during acceleration on a lowered car. 2-piece design allows you to install spacers without sliding off the whole axle assembly from the differential.
Cusco Lower Subframe Bar
SOLD
Also knows as Cusco Ladder Bars, attaches to front and rear subframe mounting holes to add chassis stiffness. Complete hardware. Has scrapes but no bends or dents. Next owner can easily have this powdercoated again to make it look like new.
TEIN Flex Coilover System
SOLD
Very good condition, no leaks. Threading on shock bodies work smoothly. Comes with both adjustment wrenches and 1 adjustment knob. No track use.
AP2 Door Panels with Custom Suede Inserts
SOLD
Very good condition, no rips, tears or stains. Comes with all switches. Any missing hardware can be sourced from your old pair of door panels
Project Kics R40 Neo Chrome Lugnuts
SOLD
Very good condition. Lettering on a few of the lugnuts have peeled away but still presents itself very well. Comes complete in box with 16 lugs, 4 locks and key.
MOMO Tuner 320mm Steering Wheel (Black with Red Stitching) with NRG Gen 2.5 Quick Release and Hub
SOLD
Wheel is in near mint condition without signs of wear. Quick Release and Hub functions perfectly. Comes with horn wiring and airbag delete resistor (not sure if the resistor works, wasn't able to reset my SRS light). I'm willing to separate both items, please let me know your offer.
AP2 Steering Wheel (no airbag or plastic side pieces)
SOLD
Wear on the top of the steering wheel, as shown. Perfect candidate for a re-wrap if you're looking to do a custom suede or leather wheel.
S2000 Carbon Fiber Spark Plug / Coil Cover
SOLD
Excellent condition, all mounting tabs are intact. Fits both AP1 and AP2 valve covers.
Price: Posted with each item. Prefer local pickup, cash only.
Location: Northridge, CA 91325
Contact: PM
Comptech Intake
200 OBO
What you see is what you get. Needs a couple of vacuum lines. This is the older version, you won't be able to use your factory hood prop due to the shape of the box's lid. The box itself is pretty rough, it's been cut open to accomodate a 4 point front strut bar.
SOLD ITEMS:
OEM S2000 Trunk Lid WITH HOLES in Grand Prix White (GPW)
SOLD
In good condition, come off an AP2 but will fit AP1. No dents or deep scratches. Original paint with VIN intact. There are 12 holes drilled (6 on each side) to mount two different wings. I've been told that the 1st set of 8 holes are for a J's Racing wing, the 2nd set of 4 holes are for an OEM non-CR wing. Comes with working electronic trunk latch mechanism. No emblem, no third brake light, no keyhole. Pictures to come soon.
BRIDE Type FG Rails for 00-05 (pair)
SOLD
In great condition, just a little dusty. Includes OEM seatbelt receptacles to you don't have to take them off your stock seats. Driver side (LH) fits 00-09, Passenger side (RH) fits 00-05. Not willing to separate. Fits most sidemount seats; you're welcome to bring your seat over for a test fit prior to purchasing. Known to fit : Bride Zieg III, Bride Vios III, Buddy Club Racing, Recaro SPG | Won't fit : Recaro Pole Position
OEM S2000 Hardtop wrapped in 3M Di-Noc CF Vinyl w/ OEM Hardware
SOLD
In good overall condition. Wrapped in 3M Di-Noc Carbon Fiber Vinyl. Suzuka Blue paint underneath the wrap is faded so a respray will be needed if you choose to remove the vinyl wrap. Headliner separating on front left corner close to the latch, easy fix for any upholstery shop. Includes the following hardware: OEM Front Latches, OEM Rear Spikes, OEM Rear Catchers, OEM Defrost Harness
SSR Type F Wheels in Matte Black with Bridgestone Potenza RE760 Sport Tires
SOLD
Wheel specs are 17x8.5+40 Front, 17x9.5+40 Rear. Tires are 215/45 Front and 245/40 Rear with a good amount of tread left. Semi-aggressive setup as seen by the concave rear wheels. Depending on ride height, will need fender rolling and rear bumper tab relocation. Near mint condition, as shown in the pictures. Gold SSR valve stems included. Sorry, not willing to separate wheels/tires.
Megan Racing 2-Piece Driveshaft Spacers
SOLD
Complete set in excellent condition; includes longer nuts and bolts necessary for install. Gets rid of vibrations during acceleration on a lowered car. 2-piece design allows you to install spacers without sliding off the whole axle assembly from the differential.
Cusco Lower Subframe Bar
SOLD
Also knows as Cusco Ladder Bars, attaches to front and rear subframe mounting holes to add chassis stiffness. Complete hardware. Has scrapes but no bends or dents. Next owner can easily have this powdercoated again to make it look like new.
TEIN Flex Coilover System
SOLD
Very good condition, no leaks. Threading on shock bodies work smoothly. Comes with both adjustment wrenches and 1 adjustment knob. No track use.
AP2 Door Panels with Custom Suede Inserts
SOLD
Very good condition, no rips, tears or stains. Comes with all switches. Any missing hardware can be sourced from your old pair of door panels
Project Kics R40 Neo Chrome Lugnuts
SOLD
Very good condition. Lettering on a few of the lugnuts have peeled away but still presents itself very well. Comes complete in box with 16 lugs, 4 locks and key.
MOMO Tuner 320mm Steering Wheel (Black with Red Stitching) with NRG Gen 2.5 Quick Release and Hub
SOLD
Wheel is in near mint condition without signs of wear. Quick Release and Hub functions perfectly. Comes with horn wiring and airbag delete resistor (not sure if the resistor works, wasn't able to reset my SRS light). I'm willing to separate both items, please let me know your offer.
AP2 Steering Wheel (no airbag or plastic side pieces)
SOLD
Wear on the top of the steering wheel, as shown. Perfect candidate for a re-wrap if you're looking to do a custom suede or leather wheel.
S2000 Carbon Fiber Spark Plug / Coil Cover
SOLD
Excellent condition, all mounting tabs are intact. Fits both AP1 and AP2 valve covers.
