fin man

Does anyone have a line on a TO. wheel shop that has '04 wheel sizes/tires that will fit the '03 without sticking out past the fender lips? More specifically the name brand of the wheels. I don't want to order from the U.S. I really don't like the looks of the stock '04 Honda wheels, just MO. I would like to see the same '03 wheels in '04 sizes.

PLYRS 3

i don't understand your question....

but, any "aftermarket" wheel will fit any S2000 the same way..

Mannn

i think he means getting 17" wheels without using spacers and what not

hyper

I think he meant that he wanted the 5 spoke wheels ('00-'03 look) on his '04 but in 17"?

As far as I know, you can very well purchase a set of used '00-'03 (obviously in 16") and it'll fit your '04 just fine... the overall wheel (i.e. rim+ tire) diameter is the same. w/ 17" you are just riding lower profile tires.

However, if you MUST have 17" then do what Plyrs 3 said. Stock offsets for 16" are F: +45 R: +55 (???) not sure about the 17" though -- should be the same since the width of the rim is the same?

PLYRS 3

no the 2004 wheels are wider than '00-'03.....

F = 17x7.0 and R = 17x8.5

hyper

I stand corrected...

So what are the stock offsets?

PLYRS 3

no idea......i don't think anyone knows.....that info is no where to be found.

unless it's stamped on the wheel.....

Jasonoff

Orrrrrrrrrrrrr you could measure it.......... idiot

Mannn

so with wider rims and tires.. does it handle better or worse that the 00-03?

fin man

What I meant was, putting 17x8.5-245-40-17 on the rear and 17x7-215-45-17 on the front of a '00-'03. Has anyone done this here in Ontario and if so who did you deal with and why?. The S2ki website has a lot California, west coast owners with 17", 18" wheels but prices across the border are more realistic than our Can. $ prices.