zeroptzero

Ap1 with intake, header, exhaust, and stock cat (no tune obviously) - 193 whp and 135 ft lbs torque.

I think everyone would have liked to see "higher" numbers, but as you know the outright number doesn't mean much without tuning and deltas to compare. Most Ap2's with basic bolt-ons, test pipes, and tunes were in the 207-214 whp range from what I recall.

Ttlpkg was there with his boosted S2000 , but I wasn't there to see if he ran his car on the dyno, along with the turbo awd Stealth. Some guys didn't run though.

myflys2k

218.5whp
08 CR with K&N fipk, 70mm TP, 70mm single forcewerkz, flash pro tuned by Gernby.
I'm happy with the results so far.

kryptonite

Those are some pretty solid numbers

Fresh AP2

215HP 143 FT LBS TRQ

2006 AP2 with 70mm Berk HFC, 70mm Greddy Spectrum Elite Dual Exhaust, no tune

Tuning to be done soon, with APH just have to book a day this month.

Really happy with baseline results, hope to get even better results once tune is done.

kryptonite

Sounds a little high for no tune but in to see the net gains post tune

myflys2k

Keep us posted. I'm curious to see what Brian's tuning results will be

C63AMG

Do dyno sheets for any of these numbers = lies...

starchland

Few years back I did 198/138 on that same dyno [i/h/e/hfc] fwiw

zeroptzero

I think this was such a strong performer based on the level of mods, and still having some form of cat. It's the run that most impressed me.

zeroptzero

Hey Jeff, that is great info. , I now have something to compare mine with. My numbers seem to fit right in with what you ran at the same dyno. Good to know.