Mark this thread as Unsold
Massive part-out! Turbo, ARC, Spoon, more
#1
Registered User
Thread Starter
Join Date: Feb 2004
Location: Charlotte, NC
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Massive part-out! Turbo, ARC, Spoon, more
Ultimate Racing V2 turbo manifold (wrapped)
Ultimate Racing spec Precision 6052E turbocharger (with PTP blanket)
Ultimate Racing oil filter relocation (accepts factory oil cooler)
Ultimate Racing 3" stainless single exhaust - $400
Turbonetics Evolution wastegate (5, 7, 9psi springs)
Greddy FMIC (S2000 specific) and piping
HKS SSQV BOV
Custom 3" stainless downpipe w/flex (wrapped) - W/G vents into DP
AEM EMS 30-1052U (w/ built in UEGO)
AEM boost control solenoid
Modifry ECT fix (to fix coolant gauge when using AEM EMS) - take above 3 for $1200
Walboro high flow/pressure pump (GSS342) - $60
NRG oil catch can - $70
ARC airbox (custom modified for use with turbo)
*** All of the above for $3600 FIRM (pricing already adjusted for sold items)!!! - Or complete turbo package without fuel/EMS/exhaust for $2400!!! Includes manifold, turbo, DP, FMIC, W/G, BOV, air filter (ARC), oil filter relocation kit, all hoses piping and clamps. Everything needed for install!!! Add AEM EMS package for $3300 firm.
Spoon oil cap - $50
NRG steering wheel - $75 (it is black.... not sure why it shows up bronze in the pic)
SKWAT Racing front bumpsteer kit (PC'd blue) - $60
SKWAT Racing rear subframe brace - (PC'd blue) - $200 New - I guarantee this is the only 1 in existence. Had it machined myself from a solid bar of 6061-T6.
before PC:
***Added Sunday, April 24***
AP1 valvecover & plug cover - paint stripped and polish job started. $100
Pair of Blue FIA Approved Sparco Rev seats. Used once in a Subaru rally car. Like new w/pair of 4 point cam lock harnesses (3" webbing) and Sparco side mounts.
Never installed these but do have 1 buddy club passenger seat rail for the S2K
$1000 Firm
ARC power chamber. Bottom panel was re-welded by the previous owner, but still functions as it should. Can't see the repair when installed - $150 - Now $100
Comptech rear sway bar. Brand new. 32mm (thing is huge!!) 30% torsional stiffness increase over stock. - SOLD
HKS EVC V Electronic boost controller. Used but in very good shape. $250 (This is not the one that was on my Subaru which leaked).
Mastergrade 4-piece CF Puzzle kit. The last one made by MG - BNIB.
I bought this kit brand new as the last Puzzle kit in existence before MG stopped making them (or went out of business). It turns out that with my turbo kit, I need to make some modifications to the kit, and I don't really want to hack these beautiful pieces up. I have some friends who do CF work and I was going to have some molds made up (which I could customize), but I don't have the time for it right now.
- The front driver side 1/4 piece does not fit with my Koyo rad
- The front driver side 1/4 piece interferes with my spoon strut bar (it would probably work fine with another bar that does not mount in front of the struts)
- The rear passenger side 1/4 piece fits nicely over the stock heat shield but I do not have one due to my wastegate.
I will sell it for what I paid - $900. Otherwise I'll keep it and make a mold eventually.
Autometer Lunar series gauges. 52mm (Just the gauges..... pod was for a Subaru anyway)
- EGT with probe. 0-1600F full sweep - $70
- Nitrous pressure. 0-1600 psi - $30
- Air/fuel ratio gauge - $30
Or $100 for all 3
Blue authentic Work Lug nuts (16) and lock nuts (4). Tires were on and off a few times, so lugs aren't perfect, but they still look good - $75
Ultimate Racing spec Precision 6052E turbocharger (with PTP blanket)
Ultimate Racing oil filter relocation (accepts factory oil cooler)
Ultimate Racing 3" stainless single exhaust - $400
Turbonetics Evolution wastegate (5, 7, 9psi springs)
Greddy FMIC (S2000 specific) and piping
HKS SSQV BOV
Custom 3" stainless downpipe w/flex (wrapped) - W/G vents into DP
AEM EMS 30-1052U (w/ built in UEGO)
AEM boost control solenoid
Modifry ECT fix (to fix coolant gauge when using AEM EMS) - take above 3 for $1200
Walboro high flow/pressure pump (GSS342) - $60
NRG oil catch can - $70
ARC airbox (custom modified for use with turbo)
*** All of the above for $3600 FIRM (pricing already adjusted for sold items)!!! - Or complete turbo package without fuel/EMS/exhaust for $2400!!! Includes manifold, turbo, DP, FMIC, W/G, BOV, air filter (ARC), oil filter relocation kit, all hoses piping and clamps. Everything needed for install!!! Add AEM EMS package for $3300 firm.
Spoon oil cap - $50
NRG steering wheel - $75 (it is black.... not sure why it shows up bronze in the pic)
SKWAT Racing front bumpsteer kit (PC'd blue) - $60
SKWAT Racing rear subframe brace - (PC'd blue) - $200 New - I guarantee this is the only 1 in existence. Had it machined myself from a solid bar of 6061-T6.
before PC:
***Added Sunday, April 24***
AP1 valvecover & plug cover - paint stripped and polish job started. $100
Pair of Blue FIA Approved Sparco Rev seats. Used once in a Subaru rally car. Like new w/pair of 4 point cam lock harnesses (3" webbing) and Sparco side mounts.
Never installed these but do have 1 buddy club passenger seat rail for the S2K
$1000 Firm
ARC power chamber. Bottom panel was re-welded by the previous owner, but still functions as it should. Can't see the repair when installed - $150 - Now $100
Comptech rear sway bar. Brand new. 32mm (thing is huge!!) 30% torsional stiffness increase over stock. - SOLD
HKS EVC V Electronic boost controller. Used but in very good shape. $250 (This is not the one that was on my Subaru which leaked).
Mastergrade 4-piece CF Puzzle kit. The last one made by MG - BNIB.
I bought this kit brand new as the last Puzzle kit in existence before MG stopped making them (or went out of business). It turns out that with my turbo kit, I need to make some modifications to the kit, and I don't really want to hack these beautiful pieces up. I have some friends who do CF work and I was going to have some molds made up (which I could customize), but I don't have the time for it right now.
- The front driver side 1/4 piece does not fit with my Koyo rad
- The front driver side 1/4 piece interferes with my spoon strut bar (it would probably work fine with another bar that does not mount in front of the struts)
- The rear passenger side 1/4 piece fits nicely over the stock heat shield but I do not have one due to my wastegate.
I will sell it for what I paid - $900. Otherwise I'll keep it and make a mold eventually.
Autometer Lunar series gauges. 52mm (Just the gauges..... pod was for a Subaru anyway)
- EGT with probe. 0-1600F full sweep - $70
- Nitrous pressure. 0-1600 psi - $30
- Air/fuel ratio gauge - $30
Or $100 for all 3
Blue authentic Work Lug nuts (16) and lock nuts (4). Tires were on and off a few times, so lugs aren't perfect, but they still look good - $75
#4
pm sent
#5
Registered User
Thread Starter
Join Date: Feb 2004
Location: Charlotte, NC
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Parts are moving fast, but there are still a few things remaining.
All remaining parts will be removed from the car this Saturday and Sunday....
If you still need to pick up parts from me, this Sunday in Burlington will be the perfect time.
All remaining parts will be removed from the car this Saturday and Sunday....
If you still need to pick up parts from me, this Sunday in Burlington will be the perfect time.
#6
Registered User
Thread Starter
Join Date: Feb 2004
Location: Charlotte, NC
Posts: 191
Likes: 0
Received 0 Likes
on
0 Posts
Thanks to all who came to pick up parts today.... Sorry if I was a bit disorganized..... this partout happened faster than I had expected and so I was really rushing to get everything together.
Hope you're all happy with your purchases.... let me know if any of you have any issues.
I've updated the list with items remaining.
(on hold items are all for an out-of-province buyer, so I'm just working on getting everything to him)
Hope you're all happy with your purchases.... let me know if any of you have any issues.
I've updated the list with items remaining.
(on hold items are all for an out-of-province buyer, so I'm just working on getting everything to him)
Trending Topics
#10
Thanks for everything Ian. Lots of great parts. Wish I would have known the partout was happening before I picked up my VTSC.
I may take you up on a place to crash next time at the dragon.
Bump for a great guy.
I may take you up on a place to crash next time at the dragon.
Bump for a great guy.