BalladeSports

Spoon Sports Magnetic Drain Plug $45
The Spoon magnetic drain bolts help remove metal shavings and debris from the engine and transmission oil. By preventing such debris from circulating in the oil amongst the engine's internals, friction between moving parts is reduced and the oil's lubricating effect is maximized. This helps maintain the consistency of the engine's power output and reduces wear and tear, improving engine life.


Spoon Sports Oil Cap $85
Fits all Honda models. Aluminum construction.
Withstands breakage due to vibration. Not just for aesthetics.


Spoon Sports Radiator Cap $35
Fits all Honda models. Available in types; Type-D and Type-F. Type-D is for most factory radiators and Type-F is for most aftermarket radiators. Please check which type before ordering.
The radiator cap increases the pressure inside the radiator, even when the temperature of the coolant exceeds 100°C and avoid boiling point The result is increased cooling performance.


Spoon Sports Carbon Kevlar S2000 Spark Plug Cover $155
The Spoon carbon plug cover is a direct fit replacement of the stock plug cover. Made from unique carbon kevlar material, each cover features extremely high quality worksmanship.


CT-Engineering Honda S2000 Supercharger Kit $4945.50
If you are ready to transform your S2000, the CT Engineering After-cooled Supercharger kit is a great start. This supercharger kit utilizes the benefits of a centrifugal supercharger, and is designed to match the factory power characteristics of the high revving Honda 2.0L power plant. The CT Engineering after-cooled Supercharger kit will add more power to your S2000 at the higher RPM's, keeping the car drivable in traffic & day-to-day driving; but throttle the engine to redline & you'll feel the burst of acceleration from the additional 70-80 horsepower at the rear wheels.
This simple bolt on kit utilizes a very efficient gear driven centrifugal supercharger. Included in the kit is everything you'll need to transform your S2000 into a Boxster killer, with 310-320 horsepower at the crank. The kit is CARB legal and includes the blower unit, after-cooler, after-cooler radiator, water pump, all mounting brackets, fuel system upgrades (including an in tank Fuel Pump & CT Engineering FPR), air box, fuel pump, regulator, all hoses & drive belt and the CT Engineering ESM unit. Cooler housing is designed with popular blow-off valve bolt pattern on by-pass valve outlet, for those who want to run higher than standard boost levels. Note: Warranty is void w/ higher than standard boost level.
This kit is designed so that it can be removed without any modifications to the factory components.


Ct-Engineering Honda S2000 Cold Air Intake $369
The CT Engineering Cold Air Intake System for the S2000 is designed to pull inlet air from outside the engine compartment to ensure that denser cold air is actually getting to the engine. This design also helps keep intake noise to a minimum. The kits use a foam filter that can be cleaned and reused.
** Cold Air Intake with reusable filter element
** Carbon fiber lid on air box
** Will not ingest water
** Slightly louder than stock
** Air box suppresses noise from filter element
** CARB legal for street use in California
This intake system has very good throttle response and smooth delivery. In addition, because this intake system is made of carbon and black plastic, it does a fantastic job to dissipate heat and keep heat-soak down to a minimum.


Golden Eagle K-Series to S2K Intake Manifold $799.99
Due to the difference in Intake manifold direction from OEM K20/K24, it is imperative to use our custom plenum intake manifold made to fit in the original direction and location as OEM S2000. This manifold is made out of 6061 Aluminum, with internal velocity stack runners mating to the plenum. This manifold has 5 pre-drilled sensor bungs. Uses K series fuel rail. Intake plenum dimensions are 15" length, 4" height, 4" width. The bolt pattern for the throttle body is same as the B series throttle body. The intake plenum has a 69mm bore. The flange is CNC billet aluminum. Uses K series injector type. Not only is this manifold made for our K Series to S2k swap but it increases air flow beyond original K20/K24 and F20/F22C OEM manifolds.


Innovative Mounts Billet Aluminum Engine Mounts Set $224.99
Made completely out of 6061 billet aluminum with polyurethane mount inserts. This replacement Mount Kit fits all S2000s. Urethane stiffness range from soft for the street (60A)to solid for the track is available. Unique no-tear vibration minimizing bushings. CAD/CAM Designed. Lifetime warranty. All hardware is included.


Rywire Ground Kit $60
The Rywire ground kit features:
- (1) 4 Gauge 20 inch long battery cable. (ring terminal style)
- (3) 8 Gauge 14 inch long ground wires.
The 3 shorter ground cables can be used for Front and Rear Transmission grounds as well as your Head/Valve cover ground.
AAAll grounds are protected with DR-25 high temp shrink.


Rywire S2000 Radiator $600
Rywire S2000 radiator for added clearance!
Dual-core, Dual-pass design
Made with -16 fittings.


Hondata Intake Manifold Gasket Heatshield $50
The Hondata heatshield is a replacement intake manifold gasket made from special high temperature plastic, designed to insulate the intake manifold from the cylinder head.


Hondata 4Bar Map Sensor $99
Vehicle applications: 00-05 S2000 02-06 RSX 04-10 TSX 06-09 S2000 06-11 Civic R18 06-11 Civic Si 07-08 Fit 10-12 CRZ 12+ Civic 13+ ILX B-Series D-Series F-Series H-Series
Note: Please make sure to choose the correct application for your vehicle.
The Hondata 4 bar map sensor is a plug compatible replacement for the Honda factory MAP sensor. It is a direct replacement for the B, D, H, F, J and K-series Honda engines. This plug in sensor takes less than 60 seconds to install and eliminates the risk of sensor damage that often occurs when attempting to wire in other types of MAP sensors.


Supertech B/H/K/F Series Titanium Retainer Set $195.20
Supertech titanium retainers are manufactured from high quality, military certified, 6AL4V titanium alloy and CNC machined for a precise fit that will ensure long term durability and many race hours of use.
Supertech titanium retainers help to prevent valve float and strengthen your valvetrain while being featherweight. They can handle a maximum net lift of 15.10mm. Coil bind is measured at 24.7mm and seat pressure was measured at 10.51lbs. per min.
Supertech titanium retainers are sold as a complete set of 16 pieces.


Supertech Honda K20/K24, F20/F22 Dual Valve Spring Set $170
Supertech performance valve springs are made with premium Superclean Chrome Silicon Vanadium Steel Alloy for higher performance and durability. Computer designed to ensure that wire stress levels do not overpass the limits for long durability under extreme conditions and harmonics are well under control.


ATI Super Harmonic Street Damper S2000 (F20/22) $467
The ATI F20/22 S2000 Super Damper comes with laser-etched timing marks and is a direct replacement for the stock OEM unit. The Damper features a single serpentine belt drive on the outer shell to utilize the factory serpentine belt set-up and comes with a removable bolt-on P/S pulley.
All ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition use.


K-Tuned Universal Power Steering and A/C Removal Kit $259.99
Applications: Fits all K20 and K24 engines
The K-Tuned A/C & P/S Eliminator Kit has been one of our best sellers for several years now. We are now releasing our 3rd revision of this pulley kit and again we have made a few changes to make our product even better. Taking a quick look back, we were the first company to offer this original design and we remain the only manufacturer that is using a dual pulley design that offers perfect belt alignment and stability, unlike some of the other the knock-off designs that are available. Another plus to our kit is that all the parts are constructed from billet aluminum, while others are still using cheaper plastic parts.
We always wanted to make our kit completely universal and have it setup to work with a 7-rib belt, just like oem. We are now pleased to say we did just that. The problem we had in the past was accessory belt manufacturers simply didn’t carry the belt size that we needed. To solve this issue, we had a stronger, custom length 7-rib belt made specifically for our kit. This move finally allowed us to make our kit 100% universal. So now, if you have a K20, K24 or even an engine that is put together with a mix of parts, there will be no fitment issues at all, they can all use the same kit.
The K-Tuned A/C & P/S Eliminator Kit deletes A/C, P/S and the factory belt tensioner from the engine. The alternator is then relocated lower and moves to the original A/C location, to increase clearance on even the tightest K-swap chassis. This part is particularly useful for EF K-swaps because it offers some much needed headlight clearance. If you want, you can even cut off the mounting tab that was used for the original tensioner. Doing this, allows ITB’s and custom intake manifolds to be fitted very easily.
This kit deletes both A/C and P/S. There is NO way to keep them with this pulley kit.


Hamp Japan Synergy Oil Filter $10.75
-The latest technology available from new engine development.
-It keeps the same performance at a smaller size by improving the filtration material and its construction.
Features
Body - Anti-corrosion paint
Relif Valve - It keeps oil circulation by adjusting the oil flow when the element is stuffed, or when the engine was turned on under ultra low temperatures.
Element - Using high performance element which effectively catches corpuscle like dust and carbon particles.
Drain Back Valve - Heat-resistant silicone rubber which prevents countercurrent oil when the engine stops, and because of this, oil starts circulating quicker upon re-start of the engine.


Fluidampr Crank Pully Honda S2000 F20C / F22C $394
You can't feel them or hear them, but harmonic vibrations are at work inside EVERY internal combustion engine. That's not good, similar to glass-shattering forces created by a high pitched note, harmonic vibrations cause metal fatigue and can cause significant power loss because crankshaft harmonics are transmitted to the camshaft and valvetrain. Control this power-robbing force with a Fluidampr harmonic damper that uses race proven vibration damping technology. A high viscosity silicone fluid surrounds a nylon-coated inertia ring inside a laser welded housing. All dampers are coated with black zinc chromate for increased corrosion resistance. Timing marks - every two degrees from 50° BTDC to 10° ATDC with additional marks at 90, 180 and 270. Meets SFI 18.1 specs.
Specifications
Bore: 1.182"
Length: 2.06"
Safety Rating: SFI 18.1
Pulley Size: Stock 6-Rib Pulley (Does Not Overdrive/Underdrive Accessories)
Finish: Black Zinc


Buddy Club Type A Radiator Cap $24.50
Buddy Club Racing Spec Radiator Cap is a direct replacement for the stock radiator cap and improves cooling performance. A radiator cap functions to increase the pressure inside the radiator so that even if the water temperature exceeds 100C, boiling will be avoided. Stock OEM radiator caps are rated at 1.1 BAR. The Buddy Club Racing Spec Radiator Cap increases the pressure to 1.3 BAR, thereby improving cooling performance
*** Note *** Radiator cap will not work with stock S2000 Radiator.


Innovative Mounts S2000 Engine Heat Shield $47.50
Due to popular requests, Innovative Mounts has created a Passenger Motor Mount Heat Shield for S2000. Protect your mount from excessive heat from a Turbo or Down pipe.


Innovative Mounts Honda S2000 Differential Mount Kit $194.99
Hardness options:
60A 75A 85A 95A
Billet Replacement Differential Mount Kit for 2000-2009 Honda S2000. This is a complete bolt in mount kit. Urethane stiffness from soft for the street to solid for the track is available. Unique no-tear vibration minimizing bushings. CAD/CAM Designed. Stress Analyzed. Lifetime warranty. All hardware is included.