Trackforged S2000 manifolds are professionally built in house , by our experienced fabricators, to provide the highest quality product. Years of research and development have been put forth to fine tune performance and reliability of each specific manifold. All Trackforged manifolds are backed by a life time warranty.



This turbo works with GT35r and Precision 6262 turbos
We're considering making a smaller version of this to batter accommodate a smaller turbo.

$899 +shipping
This price will likely be going up very soon!

Add a Turbo Screen to your purchase for just $35!



Please PM us with any questions you have.

Evan @ Trackforged

 

Hot damn thats a good price! Any dyno graphs?

What is required to be relocated with this manifold?

 

We don't currently have any with the ram-horn manifold. Concerning fitment, The factory oil cooler may need relocated with that from a b series (which threads right in) just depending on how things look once its in there, you may also depending on how tight it is need to dent in the frame rail about a millimeter but no more, I know 1mm sounds silly but its true, like one little tap with a hammer.

The price might be going up soon due to what a pain this manifold is to produce.

Evan @ Forged

 

Now offering the Forged Performance Turbo Screen as an added option!

http://www.flickr.com/photos/evanandmonica/6184176510/http://www.flickr.com/photos/evanandmonica/6184176510/ by http://www.flickr.com/people/evanandmonica/, on Flickr


Evan @ Forged

 

When you purchase the turbo screen you get everything seen here.
http://www.flickr.com/photos/evanandmonica/6184180862/http://www.flickr.com/photos/evanandmonica/6184180862/ by http://www.flickr.com/people/evanandmonica/, on Flickr

Evan @ Forged

 

First round of testing done!
Our results varied based on engine temp, as expected. Here is the layout.
The car we used for testing has a build thread here: https://www.s2ki.com/...h2kbbap2-turbo/

We did all of the testing on our mustange dyno with the hood closed.
The car was set at 12lbs the whole time.
The pulls were direct back to back comparisons between the 5"X6" k&n filter (that comes with the kit as we sell it) and our new screen.
Keep in mind we had the hood closed and our fan was really just sending blowing air through the intercooler.
On the early pulls when everything was still cold we saw results as high as 20HP and 20TQ
Once we had done 15 or so pulls and things really got cooking (with the hood still closed, except for the time it took to switch back and forth filters) the results were closer to 10HP
On average throughout the testing we saw a little over 13HP

We believe that speed and free'er flowing air + our Turbo Screen is what had the most responsibility for raising the vehicles Trap speed in the 1/4 mile since he began using it.

We plan to do more testing soon. That said we believe this item produces measurable results that are repeatable.

Evan @ Forged

 

 

 

would love something like this, but that mounts the turbo up top!

 

PM coming your way!!

Evan @ Forged