anyone good at extracting vtec bolts from the head
#1
Registered User
Thread Starter
Join Date: Jan 2009
Location: Bellevue, TN
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
anyone good at extracting vtec bolts from the head
So not even a week from my melting plug ordeal, my vtec solinoid bolts decided to shear themselves off below the head surface.
I started spewing oil on 40w Saturday after work and after a let the car sit and cool overnight. I take a look. Oil is flowing like a vein from my vtec solinoid. I discover I'm missing 2 of the 3 bolts suddenly. So I find bolts and they won't go in. I pull the vortech mounting block behind the solinoid and I see one clean hole and 2 filled with metal. Good week huh.
I figure one broke loose earlier but once that second one gave it was done
I searched the forums and this happens more than it should. I even called vortech and they said they know about it. Said " it happens" . I asked if they sell titanium replacements , the Guy says " that would help but no".
So anyway, is anyone skilled at pulling extracting subsurface bolts. The heads aluminum so I'm really nervous about trying and I don't want to spend a g if I don't have to. I will if needed, I'm not trying to be cheap, just checking my available resources. Thanks guys
I started spewing oil on 40w Saturday after work and after a let the car sit and cool overnight. I take a look. Oil is flowing like a vein from my vtec solinoid. I discover I'm missing 2 of the 3 bolts suddenly. So I find bolts and they won't go in. I pull the vortech mounting block behind the solinoid and I see one clean hole and 2 filled with metal. Good week huh.
I figure one broke loose earlier but once that second one gave it was done
I searched the forums and this happens more than it should. I even called vortech and they said they know about it. Said " it happens" . I asked if they sell titanium replacements , the Guy says " that would help but no".
So anyway, is anyone skilled at pulling extracting subsurface bolts. The heads aluminum so I'm really nervous about trying and I don't want to spend a g if I don't have to. I will if needed, I'm not trying to be cheap, just checking my available resources. Thanks guys
#2
Former Moderator
dunno about these parts, but there is Chris "Slows2k" in Alabama
#5
Registered User
Join Date: Jan 2006
Location: Smyrna, TN
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Hey man where in Smyrna are you? I live by Nissan...I should be able to get those bolts out. Oh by the way, my name is Brad, Master Certified Honda Tech. I would be willing to help you out if we can hook up on schedules.
Trending Topics
#8
Registered User
Thread Starter
Join Date: Jan 2009
Location: Bellevue, TN
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
I need to update that. I'm actually in Bellevue now. Just a few months. I'm by the Sam's club on old hickory. I get off work at 6 pm. I know that's a little ways a away now.