Not that i have ever heard, but I don't go that slowly over bumps

 

I had that noise on the coilovers you got from Tin, I just hosed the springs and all the bushings down with silicon grease and they have been quiet since. If they get too dry and all those bushings...they make noise but key is to keep them lubed up!

 

glad my pss9's dont do this

 

ah, nice, thanks for the heads up

 

Np...just to clear, it's not that clunking noise but the squeaking noise...like bushing or spring making squeaks...sorry if I wasn't clear...doing too many things at the same time!!

 

i understood, i did have to use google translate, though lol jk

 

Thank you, come again! LMAO!

 

Sorry to bring the thread back but I'm getting the exact same thing you were. Did you replace the bearings and did that fix the problem? Thanks

 

I took several different approaches. The first time I just asked for a warranty, so I did. 2 weeks later the sound came back. So I decided to switch the one I just got exchanged to the opposite side. The sound had traveled to the side I swapped it to. So automatically I knew it had to have been on that one coilover. After being annoyed, I decided to take it apart and see if putting washers on the collars that separate the pilowball on the upper mount and underside of the mount would distort the noise. The sound definitely was less audible but still there. I took it even further and took apart another set of coilovers and switched top hats and that solved my problem.

 

So it was something to do with the tophats. Thanks for the reply!