Gun Metal Gray ASA's
#1
Registered User
Thread Starter
Join Date: May 2002
Location: Bedford
Posts: 1,762
Likes: 0
Received 0 Likes
on
0 Posts
$900.00 wheels and tires for Local NTX pickup.
add pay pal fee for pay pal
ASA FR1's
17X8 R 48 offset 17.5 lbs
17X9 R 61 offset 18.5 lbs
http://home.comcast.net/~davidrierson/ASAw...ls/KIF_0097.JPG
on small bend on the lip of one of the front wheels this is on the inside of the wheel and is not seen at all. The balance of the wheel is unaffected even at 145mph.
http://home.comcast.net/~davidrierson/ASAw...ls/KIF_0120.JPG
I bought these new back the summer as soon as I got them I sent them to be powder coated
these stil have the first and only set of tires on them V700's 2 auto'x and 80 hot laps on the tires. I am sure there is at least one hard event left on these wheels.
Let me know,
Jeremy
jgarcia@texasresidential.com
I will also be selling the old JIC full titanium with can, 7-8 lbs exhaust for $350 there is a flat spot on the back of the pipe, insurance company is replacing it and I get the old one back. The performance of the exhaust should be unaffected. This exhaust can be picked up for 1070-1300 depending on who you buy it from. Major weight loss for not a whole lot of money. Remember the can is a clamp on, so if you feel the pipe is compromised by the flat spot replace it with a SS single pipe and would will still have a light weight exhaust system.
I will also have 3 of 4 JIC coil overs available. You would have to pick up one new rear from some where. $100.00 for each coil over.
I am not sure if I will be selling anything else off the car. That is it for now.
add pay pal fee for pay pal
ASA FR1's
17X8 R 48 offset 17.5 lbs
17X9 R 61 offset 18.5 lbs
http://home.comcast.net/~davidrierson/ASAw...ls/KIF_0097.JPG
on small bend on the lip of one of the front wheels this is on the inside of the wheel and is not seen at all. The balance of the wheel is unaffected even at 145mph.
http://home.comcast.net/~davidrierson/ASAw...ls/KIF_0120.JPG
I bought these new back the summer as soon as I got them I sent them to be powder coated
these stil have the first and only set of tires on them V700's 2 auto'x and 80 hot laps on the tires. I am sure there is at least one hard event left on these wheels.
Let me know,
Jeremy
jgarcia@texasresidential.com
I will also be selling the old JIC full titanium with can, 7-8 lbs exhaust for $350 there is a flat spot on the back of the pipe, insurance company is replacing it and I get the old one back. The performance of the exhaust should be unaffected. This exhaust can be picked up for 1070-1300 depending on who you buy it from. Major weight loss for not a whole lot of money. Remember the can is a clamp on, so if you feel the pipe is compromised by the flat spot replace it with a SS single pipe and would will still have a light weight exhaust system.
I will also have 3 of 4 JIC coil overs available. You would have to pick up one new rear from some where. $100.00 for each coil over.
I am not sure if I will be selling anything else off the car. That is it for now.
#3
I'd like to take a look at the coilovers... Do you have the 4th one, even if it is bent?
IS the dampening adjustable? If so, compression and rebound independently ?
I'd basically use these for parts as I plan to build my own strut housings for the MR2.
Also, what size pipe is the exhaust? I might could source a piece of straight pipe to replace the area that is crushed. Welding TI isnt' too bad.
Brad
IS the dampening adjustable? If so, compression and rebound independently ?
I'd basically use these for parts as I plan to build my own strut housings for the MR2.
Also, what size pipe is the exhaust? I might could source a piece of straight pipe to replace the area that is crushed. Welding TI isnt' too bad.
Brad
#4
Registered User
Thread Starter
Join Date: May 2002
Location: Bedford
Posts: 1,762
Likes: 0
Received 0 Likes
on
0 Posts
the 4th one snapped in half, it F-___D
the upper moount is still good, the piston or rod is what snapped the spring looked like it was ok.
on the wheels, $900 is one hell of a deal considering these are $942 new
the upper moount is still good, the piston or rod is what snapped the spring looked like it was ok.
on the wheels, $900 is one hell of a deal considering these are $942 new
#7
Registered User
Thread Starter
Join Date: May 2002
Location: Bedford
Posts: 1,762
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post