did some underbonnet colour coding
Thread Starter
Registered User
Joined: Jan 2010
Posts: 975
Likes: 0
From: Shetland Isles
did some underbonnet colour coding
as some of you know I bought some blue hoses at JAE with the means to covering a few bits and replacing some of the hoses so this past weekend I had some spare time and good weather i cracked at first of all a before shot
first pipe to be done was the radiator to the expansion tank easy
I then replace all the pipework from the cam cover to the inlet manifold a few of these were a tad on the difficult side to get off but again I managed.
next up I cut lengths and split them so they could be put over the throttle cable and the brake pipes.
I think its not to bad a job.
first pipe to be done was the radiator to the expansion tank easy
I then replace all the pipework from the cam cover to the inlet manifold a few of these were a tad on the difficult side to get off but again I managed.next up I cut lengths and split them so they could be put over the throttle cable and the brake pipes.
I think its not to bad a job.
