Wanting to Roll my rear arches by archenemy any group interest?

Reply Subscribe

Thread Tools

05-30-2017, 08:51 AM

#31

KW888

Registered User

Thread Starter

Join Date: Feb 2017

Posts: 48

Likes: 11

Received 1 Like on 1 Post

Quote:

Originally Posted by mr-pitts

I run et38 rears et42 fronts that is why I needed my rears rolling,my fronts were fine.The rear quarter buckled in above the swage line....quite common apparently,but I only found out how common after it happened to mine.

I now run et35 fronts and 40 rears with a 10inch rim but I've got body mods to cope with it.None of the mods help cope with the awful instability under braking because of the stupid offset tho.

I was told to maybe run a -3 camber angle this shouldn't affect the drive that much and still have about 85/90% tyre traction to the ground. Although Deep dish face option is the same as a 41et or so offset. This should be fine. Although my rear aren't as wide as as yours so the 9.5 should be perfect I hope lol

Reply Like

05-30-2017, 02:37 PM

#32

mr-pitts

Registered User

Join Date: Sep 2009

Posts: 3,967

Likes: 0

Received 2 Likes on 2 Posts

I was running a lot of camber on the rear but I was struggling to get 500 hp down,even running slicks on the dyno they were spinning up.

Reply Like

05-31-2017, 12:19 AM

#33

Mike's

Registered User

Join Date: Mar 2014

Posts: 490

Likes: 9

Received 29 Likes on 25 Posts

Be prepared to do some more work than just a roll on those wheel sizes and specs, also don't forget the tyre sizes play a big part of it too

the wheels i got to run on mine were 17 x 8 35 (235 40 17 R888 ) and 17 x 9 +38 (275 45 17 R888) these were borrowed off a friend as i needed some wheels after i crashed mine and bent 3 wheels,i just about managed to fit them under the arches with the 20mm ASM style arches

Last edited by Mike's; 05-31-2017 at 12:26 AM.