Where's the speedo signal cable?
#1
Thread Starter
Where's the speedo signal cable?
I decided to fit Modifry's Yellow Jacket speedo calibrator this afternoon in readiness for my changed final drive. However, I've hit a problem - I can't find the blue/white cable shown in Modifry's LHD car diagrams:
Here's the wiring in my car:
In my car the most obvious candidate for the blue connector which Modifry describes as the "C101" (the blue connector at the bottom of my picture above) has 6 wires:
2 x solid blue
blue/red
blue/yellow (hurray, this is the power one!)
black/white IIRC.
There is another blue connector tucked under a grey connector, but the only blue and white cable is very chunky indeed.
I've checked the Honda ESM and the wiring diagram refers to a blue/white cable, so where is it? Is this problem because the ECM is on the passenger side in a RHD car? Should I be digging behind the ECM?
Any help much appreciated
Here's the wiring in my car:
In my car the most obvious candidate for the blue connector which Modifry describes as the "C101" (the blue connector at the bottom of my picture above) has 6 wires:
2 x solid blue
blue/red
blue/yellow (hurray, this is the power one!)
black/white IIRC.
There is another blue connector tucked under a grey connector, but the only blue and white cable is very chunky indeed.
I've checked the Honda ESM and the wiring diagram refers to a blue/white cable, so where is it? Is this problem because the ECM is on the passenger side in a RHD car? Should I be digging behind the ECM?
Any help much appreciated
#2
Member
If you have a multimeter you could check the wire you suspect it to be. Throttle position is normally 0-5v so set the multimeter to V and press the pedal flat with the ignition on.
Not a great help but one way of doing it!
Nobody got a UK ECU pinout diagram?
MB
Not a great help but one way of doing it!
Nobody got a UK ECU pinout diagram?
MB
#3
Member
Hmm, is it an ECU diagram you're using, which shows the mouth of the ECU?
Ive been caught out with these before, and got them back to front! Easy mistake to make
MB
Ive been caught out with these before, and got them back to front! Easy mistake to make
MB
#5
Thread Starter
Originally Posted by AquilaEagle,Aug 7 2005, 08:29 PM
Craig isn't it in the ESM?
#6
Thread Starter
Originally Posted by Dark Blue Mark,Aug 7 2005, 05:43 PM
Hmm, is it an ECU diagram you're using, which shows the mouth of the ECU?
Ive been caught out with these before, and got them back to front! Easy mistake to make
MB
Ive been caught out with these before, and got them back to front! Easy mistake to make
MB
#7
Join Date: Dec 2001
Location: City Of London / Knebworth
Posts: 39,551
Likes: 0
Received 11 Likes
on
10 Posts
Craig, the ECU is in the same place in both Left and Right hand drive cars ..... which is the passenger side on UK cars.
How come you managed to get your "Yellow Jacket speedo calibrator" so quick? did you order it from Rick? (still hasn't replied to my email )
How come you managed to get your "Yellow Jacket speedo calibrator" so quick? did you order it from Rick? (still hasn't replied to my email )
Trending Topics
#8
Thread Starter
Originally Posted by StevenM,Aug 8 2005, 06:54 AM
Craig, the ECU is in the same place in both Left and Right hand drive cars ..... which is the passenger side on UK cars.
How come you managed to get your "Yellow Jacket speedo calibrator" so quick? did you order it from Rick? (still hasn't replied to my email )
How come you managed to get your "Yellow Jacket speedo calibrator" so quick? did you order it from Rick? (still hasn't replied to my email )
Rick sells the "Yellow Box" I bought Modifry's "Yellow Jacket" via the Marketplace and its was here within a week. It's S2000 specific whereas the Yellow Box does not appear to be so (check out the instructions on/linked from Rick's website to become thoroughly confused).