Mark this thread as Unsold
FS: Bargain caged shell & parts
#1
Bargain caged shell & parts
All, due to work commitments and our first child arriving i dont have any time to deal with breaking the car out further. I apologies to anyone who has messaged in the last month or so.
I have decided to advertise everything i have left in one lot. Its a bargain for someone wanting to build a track car. I will be keeping an eye on notifications for PM's from anyone interested!
99 JDM shell with custom cages cds 8 point cage
Shell details
It is a 99 jdm shell that had covered approx 70k miles. I have the v5 etc registered in my name.
I wanted to get the car to under 1 ton built so anything unnecessary has been removed. A brief out line is below
Boot floor cut out (alu sheet covering it now for fuel cell)
Original fuel tank cover cut out
All unnecessary brackets removed
Gearbox tunnel strengthening removed
Scuttle panel/bulkhead cut out
Light brackets/radiator bracket holesawed out
Top radiator stay cut out
Rear end was brought back to bare metal, sealed with waxoil then sprayed with 4 coats of stonechip.
Front arches have been sprayed with stonechip as well.
The shell has rust issues that will need attention on the passenger side rear sill area.
The arches will also need attention as they have been rolled/flared.
One of the front subframe bolts snapped on removal so this will need attention as well.
One of the hard top mounting bolts on the front rounded so it has been drilled and tapped out bigger several times but I would recommend it is properly repaired.
Car is located just outside Aberdeen.
Will also come with
Meister r coilovers
OEM subframes with spoon rigid collars
Rear passenger side hub and driveshaft
Both front hubs
Front and rear anti roll bars with polybushes
Jaz fuel cell
Various interior parts
Cylinder head
Various engine ancillaries (alternator, inlet manifold etc)
Bucket seat and rail
Rota fighter 17x9 wheels (never seen the road, brand new)
Carbon boot with aerocatches
BWM shop oem rep low level spoiler
Standard manifold and cat with modified single exit oem system
XP8 pads
Front calipers (stripped down)
Steering rack with ballade sports solid steering rack spacers
Izzy hardtop brackets
Gearbox
Prop
2 x rear diffs (one in parts other still together but needs looked at)
Plus a few other things.....
Please be advised the car and the parts have been in a barn for well over a year, they are perfect, but need a clean up.
For all that, arrive with a van and trailer and £1750, anything s2000 you find in the barn is yours!
Thanks all!
I have decided to advertise everything i have left in one lot. Its a bargain for someone wanting to build a track car. I will be keeping an eye on notifications for PM's from anyone interested!
99 JDM shell with custom cages cds 8 point cage
Shell details
It is a 99 jdm shell that had covered approx 70k miles. I have the v5 etc registered in my name.
I wanted to get the car to under 1 ton built so anything unnecessary has been removed. A brief out line is below
Boot floor cut out (alu sheet covering it now for fuel cell)
Original fuel tank cover cut out
All unnecessary brackets removed
Gearbox tunnel strengthening removed
Scuttle panel/bulkhead cut out
Light brackets/radiator bracket holesawed out
Top radiator stay cut out
Rear end was brought back to bare metal, sealed with waxoil then sprayed with 4 coats of stonechip.
Front arches have been sprayed with stonechip as well.
The shell has rust issues that will need attention on the passenger side rear sill area.
The arches will also need attention as they have been rolled/flared.
One of the front subframe bolts snapped on removal so this will need attention as well.
One of the hard top mounting bolts on the front rounded so it has been drilled and tapped out bigger several times but I would recommend it is properly repaired.
Car is located just outside Aberdeen.
Will also come with
Meister r coilovers
OEM subframes with spoon rigid collars
Rear passenger side hub and driveshaft
Both front hubs
Front and rear anti roll bars with polybushes
Jaz fuel cell
Various interior parts
Cylinder head
Various engine ancillaries (alternator, inlet manifold etc)
Bucket seat and rail
Rota fighter 17x9 wheels (never seen the road, brand new)
Carbon boot with aerocatches
BWM shop oem rep low level spoiler
Standard manifold and cat with modified single exit oem system
XP8 pads
Front calipers (stripped down)
Steering rack with ballade sports solid steering rack spacers
Izzy hardtop brackets
Gearbox
Prop
2 x rear diffs (one in parts other still together but needs looked at)
Plus a few other things.....
Please be advised the car and the parts have been in a barn for well over a year, they are perfect, but need a clean up.
For all that, arrive with a van and trailer and £1750, anything s2000 you find in the barn is yours!
Thanks all!
Last edited by MB; 04-17-2017 at 11:33 PM. Reason: More parts added/Sold parts removed
#2
1000 GBP is a bargain for that shell, just the roll cage itself costs more than that! GLWS, I'd buy it today myself if it were LHD
Some questions on the diff/FD assembly:
- what brand is the final drive?
- what ratio?
- what's the price for the diff+FD combo?
Thanks!
Alex.
Some questions on the diff/FD assembly:
- what brand is the final drive?
- what ratio?
- what's the price for the diff+FD combo?
Thanks!
Alex.
#4
All PM's replied too.
Alexrosiu - thanks, im sure the shell could be converted to left hand drive easily
The final drive has been sold from the diff, so it is only the LSD for sale @ £575. You can read about the diff here https://www.uk.spoonsports.eu/41000-ap1-000.html
Thanks
Alexrosiu - thanks, im sure the shell could be converted to left hand drive easily
The final drive has been sold from the diff, so it is only the LSD for sale @ £575. You can read about the diff here https://www.uk.spoonsports.eu/41000-ap1-000.html
Thanks