carlip8

As title suggests, Tein S-Tech springs on the OEM struts, benefit of this is no need to remove your old springs from your OEM struts, just a straight swap is needed.

More information on the Tein springs here: http://www.eightspeed.co.uk/acatalog/S2000_Springs.html

TEIN S.TECH Spring is excellent step towards your suspension tuning.
This spring kit offers approximately 1.5 inch drop for a more aggressive appearance.
Spring length is guaranteed not to sag more than 5mm and to be clear of any manufacture defects

- Rubber spring protector tube to prevent noise (most applications).
- High-grade material adapted to improve guaranteed satisfaction.
- Special high quality powder coating and painting treatment for rust prevention.
- Exclusive design for the S2000



I have seen the price of these springs on Ebay for £130 including delivery, taking this into consideration and totally ignoring RRP(£200), I would sell the springs with the OEM struts for the same price. Delivery price can be arranged.

The struts have covered circa 50k miles, springs about 9k miles. In good/great condition.

Please note, these are still on the car and will be removed once I receive delivery of my coilovers, so you could say this is for 1st dibs when they are removed.

Thanks in advance,

Carlip

AlexMeineck

Do you have a picture of how the car sits with them fitted, want to know how low it looks. Im keen on them.....

s2konroids

Good price!

carlip8

The springs lower the car anywhere between 30-40mm:

[attachment=19259:IMG_1979.jpg][attachment=19260:P1040013.jpg]



I've tried to get the closest angle of photos taken and these are the two I have found.
Before:
[attachment=19262:P1030026.jpg]
After:
[attachment=19261:P1040027.jpg]



Carlip.

carlip8

Priced to sell, as when my coilovers arrive, i'll have 3 sets of suspension

carlip8

Thanks for all the PM's guys, as mentioned, I will remove them in the next week or so, take pics and upload, just to make sure the potential buyer is 100% happy with what they are purchasing. Appreciate your patience.

carlip8

Finally got round to removing them over the weekend, here's some pics of them off the car.

Diccon has first dibs, and another 2 members pending dibs.

[attachment=19963:IMG_2343.JPG][attachment=19964:IMG_2345.jpg]

Shocks have a little bit more surface rust than anticipated, the springs are good/excellent.

Front springs are 5.3kgf/mm and rear are 6.5kgf/mm.

jimbo9K

I'm interested if they don't sell!! I need them in my life...

carlip8

Hi Jimbo,

I'll keep you updated in regards to what happens with these

jimbo9K

Cheers!!