Genuine Honda Parts Thread
#1331
Originally Posted by mdb_75' timestamp='1365095052' post='22451328
Is my bolt on it's way yet Si?
But I sent it out late today by royal mail so it should be with you Saturday I would expect
#1333
UK Trader
Thread Starter
Hi Si,
I've managed to break the tab on my left hand indicator repeater - do you have a 33851S2AJ02 in stock ? I'm also after 2 x rear toe adjuster bolts 90176S2A010 and 1 x rear lower wishbone adjuster 90173S2A000 - so you have those in too ?
I think I have tomorrow off so will pop in to pick them up if I can ?
I've managed to break the tab on my left hand indicator repeater - do you have a 33851S2AJ02 in stock ? I'm also after 2 x rear toe adjuster bolts 90176S2A010 and 1 x rear lower wishbone adjuster 90173S2A000 - so you have those in too ?
I think I have tomorrow off so will pop in to pick them up if I can ?
#1334
UK Trader
Thread Starter
#1336
UK Trader
Thread Starter
51308-SZ3-010 BRACKET, STABILIZER RRP £10.60 each HPP £9 EACH
90161-S2A-000 BOLT, FLANGE, 14X160 x2 RRP £11.29 each
90161-SR3-000 BOLT, FLANGE, 14X107 x2 RRP £16.73 each
90162-S2A-000 BOLT, FLANGE, 14X130 x2 RRP £13.02 each
90163-S2A-000 BOLT, FLANGE, 12X202 x2 RRP £18.59 each
90164-S2A-000 BOLT, FLANGE, 12X162 x2 RRP £ 14.86 each
I can do 10% off all these.
They are from the B-48 Cross beam diargam - I can email you a picture if you want to send over your email by PM.
Si
#1338
UK Trader
Thread Starter
Thanks! expect an email back in the next 20 minutes from the Honda system directly.
#1339
Hi Si,
Hope you're well.
My local garage are having problems adjusting my front camber settings, look to be seized. Therefore, I'd like to take the opportunity to replace the camber bushes and probably castor at the same time. I believe you can provide Mugen replacements for both, is that correct?
Can you advise on price and availability please. Car is a 2005 model.
Assuming they will need to cut out the old bushes etc, are you able to list (and price) any bolts, washers, nuts etc that will most likely need replaced at the same time. That'll save the car being up on ramps for days waiting for replacement parts to finish off the job.
Thanks again.
Graeme
Hope you're well.
My local garage are having problems adjusting my front camber settings, look to be seized. Therefore, I'd like to take the opportunity to replace the camber bushes and probably castor at the same time. I believe you can provide Mugen replacements for both, is that correct?
Can you advise on price and availability please. Car is a 2005 model.
Assuming they will need to cut out the old bushes etc, are you able to list (and price) any bolts, washers, nuts etc that will most likely need replaced at the same time. That'll save the car being up on ramps for days waiting for replacement parts to finish off the job.
Thanks again.
Graeme
#1340
Si has a separate Geo bolts thread here https://www.s2ki.com/s2000/topic/923...dyperformance/ and the bushes are in his shop here http://www.hendyperformance.co.uk/pr...51391-xgs-s0n0 and here http://www.hendyperformance.co.uk/pr...51353-xgs-s0n0
HTH
HTH