Mark this thread as Sold
Sept. 2010 UMW FS/WTB thread
#11
Selling my single N1 exhaust. It has 63mm piping with no resonator. Best part about the exhaust is that it only weighs 14lbs!! Asking $350
Ultimate Racing 3 inch test pipe with built in o2 simulator. I also had profunction weld an extra bung in for a wideband. This test pipe will not throw any codes, the way UR set up the secondary o2 location works perfectly. Asking $150
Synapse Engineering fuel pressure regulator. Just rebuilt by synapse. Did not get it back and on in time for my tune. Have no use for it as it will mess my tune up. Asking $140
Ap1 ignition coils with 44k on them. Asking $120
I am also looking for a few things. Willing to take these as trades or just buy outright if someone is selling. Silverstone AP2 front, Shine front, APR mirrors, spoon style diffuser.
Ultimate Racing 3 inch test pipe with built in o2 simulator. I also had profunction weld an extra bung in for a wideband. This test pipe will not throw any codes, the way UR set up the secondary o2 location works perfectly. Asking $150
Synapse Engineering fuel pressure regulator. Just rebuilt by synapse. Did not get it back and on in time for my tune. Have no use for it as it will mess my tune up. Asking $140
Ap1 ignition coils with 44k on them. Asking $120
I am also looking for a few things. Willing to take these as trades or just buy outright if someone is selling. Silverstone AP2 front, Shine front, APR mirrors, spoon style diffuser.
#12
Registered User
Join Date: Dec 2008
Location: Northwest Suburbia
Posts: 203
Likes: 0
Received 0 Likes
on
0 Posts
WTB: Stock/OEM Shift Lever.
I regreased my lever and cracked the bottom plastic ball/bushing when I removed it. It works but I’d feel better if I had one that wasn’t cracked.
Perfect opportunity for someone who has upgraded to a short shifter to unload some un-used parts.
I regreased my lever and cracked the bottom plastic ball/bushing when I removed it. It works but I’d feel better if I had one that wasn’t cracked.
Perfect opportunity for someone who has upgraded to a short shifter to unload some un-used parts.
#14
Registered User
Join Date: Sep 2001
Location: Chicago, IL
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
WTB: Vented Carbon Fiber hood and a Silverstone passenger side fender. I am located in Chicago and willing to travel a reasonable distance. Please PM me if you have either. Thank you!
#18
WTB: F20/22 short or longblock.
Scored #4 wall in my ap1, possibly looking to purchase either a short or longblock (instead of rebuilding mine). So long as it's a healthy motor, anything for sale will be considered. I'm not looking to spend much and would prefer to keep it stock; I have no plans to go f/i.
Scored #4 wall in my ap1, possibly looking to purchase either a short or longblock (instead of rebuilding mine). So long as it's a healthy motor, anything for sale will be considered. I'm not looking to spend much and would prefer to keep it stock; I have no plans to go f/i.
#19
Registered User
Join Date: Oct 2009
Location: Illinois
Posts: 967
Likes: 0
Received 0 Likes
on
0 Posts
OEM Berlina Black hard top -2600
only pictures i have are with my iphone sorry.
I will also have FS: but not until next weekend because the parts are still on the car lol. I will update with pictures when I actually pull stuff off, but I am getting PM's about what else I will have FS and for how much... All parts are "used" but were not on the car for long.
T1R 70-EM single exhaust 800
Berk 70MM high flow cat 200
OEM Seibon CF hood 450
Apexi VAFC neo + Boomslag harness. Dyno tuned by profunction with intake, header, hfc, and exhaust. Car made 228whp. It was installed on an AP2. 300
Axial Flow STS 200
Moddiction textured black knobs 40
Buddy Club coilovers 650
Ray Engineering “Toms” C7R’s (no tires) 1200
Alpine iDA-X305S 200
I think pricing is fair, but you can always PM me with offers... no low balls, i wont respond.
only pictures i have are with my iphone sorry.
I will also have FS: but not until next weekend because the parts are still on the car lol. I will update with pictures when I actually pull stuff off, but I am getting PM's about what else I will have FS and for how much... All parts are "used" but were not on the car for long.
T1R 70-EM single exhaust 800
Berk 70MM high flow cat 200
OEM Seibon CF hood 450
Apexi VAFC neo + Boomslag harness. Dyno tuned by profunction with intake, header, hfc, and exhaust. Car made 228whp. It was installed on an AP2. 300
Axial Flow STS 200
Moddiction textured black knobs 40
Buddy Club coilovers 650
Ray Engineering “Toms” C7R’s (no tires) 1200
Alpine iDA-X305S 200
I think pricing is fair, but you can always PM me with offers... no low balls, i wont respond.
#20
I have the following Items for sale, first i have a set of Neumark TT500's with a DJX700, these are mint and come with new stanton needles. I paid $900 willing to let them go for $700 and will throw in a bunch of hiphpop and various records(about 40)
Next I have an engagement ring, not mine lol, here's the apraisal.
Appraisal by Perfect match Inc.
29 E Madison Suite 1515
Chicago Il 60642
By Gabriel Adler
"on this day we have examined one ladies engagement ring made of platinum weighing 3-94 grams and containing a center stone princess cut diamond weighing approximately 0.46 cts of G color and Si2 clarity measuring 4.61-3.89x3. The ring also contained 4 round brilliant cut stones G color and Si1 clarity and 2 Baguettes of G color and VS clarity."
Asking 1,600.00 paid 2,900 appraised at 3,875.00
Not negotiable, firm offer
Thanks for looking
Next I have an engagement ring, not mine lol, here's the apraisal.
Appraisal by Perfect match Inc.
29 E Madison Suite 1515
Chicago Il 60642
By Gabriel Adler
"on this day we have examined one ladies engagement ring made of platinum weighing 3-94 grams and containing a center stone princess cut diamond weighing approximately 0.46 cts of G color and Si2 clarity measuring 4.61-3.89x3. The ring also contained 4 round brilliant cut stones G color and Si1 clarity and 2 Baguettes of G color and VS clarity."
Asking 1,600.00 paid 2,900 appraised at 3,875.00
Not negotiable, firm offer
Thanks for looking