silver_stone

I will be installing my supercharger this week and seeing if anyone is bored? I work till 6.30 so I will be working on it everday from 7-11ish. I will supply beer and food! Im in Shorewood, IL which is by Joliet. Also I need to buy a bigger fuel pump, hondabond, a belt for vortech, and a breather filter. If anyone has any of these, please let me know. Thanks! I havent met too many people on here yet, but I promise I will not rape you or anything of the sorts lol.

-Bob

james0933

Pic up those parts first. Did you look at the checklist to make sure you have all of the hardware and pieces?

silver_stone

The supercharger was the one quivers was selling so if something else isn't there, im sure he has it as his shop which is close. I went through a lot of it and as far as I can tell, everything is there. I should be getting all the rest of the parts soon. Hondabond I can get at honda ..the belt and breather from autozone and someone just pmd me about a pump.

james0933

2x vtec solenoid gaskets? Do you have a wideband to install as well or are you going straight to the dyno?

james0933

And really, you shouldn't be just putting a breather filter on. You should connect it back to the supercharger inlet pipe so that it helps to pull the gasses out as opposed to it just venting.

If you insist on a filter, I would use one inline.

silver_stone

Do I need a wideband?

james0933

How would you know how it's running? I would say so especially since in most cases they run lean outta the box.

Bradyy91

I live in Joliet, never done a supercharger before. But I can be tool bitch? Lol, I'm down to give you a helping hand brother.

javier_acosta70

using a wideband will be the smart way, in my opinion

james0933

Status?